User manual BOSCH WOL1650EU

[. . . ] WOL 1650 en Instruction Manual Internet: http://www. bosch-hausgeraete. de Table of Contents Operating Instructions Disposal Information . Environmental Protection / Conservation Issues . Before Using Your Washing Machine For the First Time . [. . . ] 30, 40, 60 °C Cottons + Linens For hard wearing fabrics 30, 40, 60 °C Easy care For easy care fabrics made from cotton, synthetics or blended fibres. 30 °C Delicates For sensitive, easy care fabrics made from cotton, silk, synthetics or blended fibres, and net curtains. 30 °C, Woollens cold For hand or machine washable fabrics made from wool or wool blend. 6 21 Extra cycle programme selector Rinse Separate rinsing cycle with subsequent spin cycle for easy care fabrics. Spin Separate spin cycle with variable spin speed. Washing solution or rinsing water is drained prior to the spin cycle. Drain Draining of the rinsing water after a wash programme with the Rinse hold" setting for the gentle treatment of delicate laundry. Additional function r Rinse Plus An additional rinsing cycle is performed; The washing duration will be prolonged accordingly. Recommended application: In areas with very soft water. D Reduced washing duration - only 2 rinsing cycles. Recommended load amount: Up to a maximum of 3 kg. Maximum spin speeds Revolutions per minute 800 800 600 800 800 800 Option buttons Type of laundry / Extra cycle Cottons + Linens Easy care Delicates Woollens Rinse Spin C Washing remains in the last rinsing water. Start the "Drain" or "Spin" programme. The washing can also be removed dripping wet. Set the programme selector to "Off" and wait approx. 2 minutes. 22 Unbalanced load detection system The automatic unbalanced load detection system spins the washing several times to ensure even distribution. In the woollens programme the washing is spun only twice to prevent matting. If the washing is very unevenly distributed, the machine will not spin. 23 Washing q Turn on the water tap. Start the programme q Turn the programme selector to the desired pro gramme (refer also to separate Programme Chart"). The Ready" control light comes on. q Select the desired spin speed or C". q Where required, press the option button(s) for additional function(s). 24 q Press the 3" button. The Active" control light comes on, and the pro gramme starts. The Active" control light remains lit for the entire duration of the programme. Changing a programme If you have accidentally selected the wrong programme: q Turn the programme selector to Off". q Turn the programme selector to the desired programme. The Active" control light comes on, and the new programme starts. Cancelling active programme If you wish to prematurely end a programme: q Turn the programme selector to Off". q Turn the programme selector to Drain" or Spin". For Spin", select the desired spin speed (but not C"). [. . . ] Noises may be generated during the running in phase of the drive motor. Noises generated when the pump starts up or draws air are normal. Programme not ended or "C" selected. When the water has been drained and the programme has ended, the appliance lid can be opened after approx. [. . . ]