User manual BOSCH WTB84390FF

[. . . ] Please take a few minutes to read and become familiar with the advantages of your washer dryer. To meet the high quality demands required by Bosch, every washer dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www. If the operating and installation instructions describe different models, any differences will be pointed out at the relevant points in the text. [. . . ] Cottons 60C The display panel alternately shows 2(Remaining time) and the commended load and thekg If necessary, adjust the temperature and the spin speed and select any options for your individualised programme. Press the ` (Drying) button to set the drying options. Changing the programme To change the programme: Getting to know the appliance en end of the programme The washing and drying programmes are ended automatically. Leave the door open to allow the inside of the washer-dryer to dry out. Turn off the tap (not necessary on models with Aqua-Stop). Cancelling the programme Press and hold button Start/Pause I until <<:<< is displayed. for washing programmes at high temperatures: Cooling down laundry: choose +0+Spin press the Start/Pause I button. For programmes at low temperatures: Choose p+0+Spin Press the Start/Pause I button. If you cancel the Drying programme, the laundry may still be very hot. Deactivated at the start of the wash cycle, the washing programme is automatically stopped after the final rinse. The display panel shows þ alternating with --:-In order to drain the rinsing water and, if required, spin the laundry: Press theSpin repeatedly Until the required spin speed is set. The water is Drained and the washerdryer spins the laundry. Theprogramme is completed when "Ys appears in the display field. The maximum spin speed depends on the selected wash programme. If you do not wish to spin the laundry: Press the Spin button (remaining time for Draining is displayed). The water is Drained, but the washerdryer does not spin the laundry. The programme is complete when "Ys appears on the display panel. Leave the door open to allow the inside of the washer-dryer to dry out. Turn off the tap (not necessary on models with Aqua-Stop). Coins, paper clips, needles, nails) may damage the washing or components of the appliance. The following instructions must be observed when preparing your laundry: Always follow the manufacturer's instructions when dosing all detergents, cleaning aids, care products and cleaning agents. Keep detergents and agents for the pretreatment of laundry (e. [. . . ] Please then follow the instructions on searching for models. The model identifier is made up of the characters before the slash in the product number (E-Nr. Alternatively you can also find the model identifier in the first line of the EU energy label. Trust the expertise of the manufacturer. [. . . ]