User manual BOSCH WVD24420EU

[. . . ] Wash + Dry Maxx 5/2, 5 en Operating and Installation Instructions Table of Contents Operating instructions Information concerning waste disposal . Protection of the environment / hints and tips . Before using your washer dryer for the first time . Preparing, sorting and loading the laundry . [. . . ] Temp. i For different clothing, there are different programmes with respective temperature ranges. Spin speed You can change the default spin speed. q Touch the B Spin button until desired spin speed displays. i If setting L (without final spin) has been selected, the washing remains in the final rinsing water. Before the laundry can be uploaded, the Empty or Spin B programme must be performed. Touch Spin B button to select the desired spin speed or touch the Start/Pause " button directly to start subsequent spin cycle with default spin speed. i The speed can be changed at any time by touching the Spin B button until the new speed is displayed. Setting "L" (without final spin) is possible until the Rinse programme section starts. 31 Finish in time Example of Easy Care 40 ºC programme: Before a programme starts, you can specify by how many hours later the programme is to be ended. q Touch the W Finish in button, the display shows the minimum finish in time of the selected programme. i The minimum finish in time of different programmes are different. It depends on the duration of selected programme. q Touch the W Finish in button until the desired number of hours is displayed. i The finish in time can be set in 1 hour steps. The time can be delayed up to a maximum of 24h. If a finish in time of 24h has been set, the programme duration mode can be accessed by touching the W Finish in button again. You can change other settings or q Touch the Start/Pause button. The finish in time starts counting down. i The finish in time is counted down by the hour. When the finish in time has elapsed, the programme starts automatically and the programme duration is displayed. i Changes to the finish in time or an immediate start are possible. To do this: - Touch the Start/Pause button. button directly to start - Touch the Start/Pause the programme immediately. - Touch the Start/Pause button. 32 i If the programme sequence is changed by rotating the programme selector or the programme is cancelled, the preselected finish in time is also cancelled. The programme duration of the newly selected programme appears in the display. The finish in time must be reselected (see also chapter Changing the programme, page 36 and Cancelling the programme, page 36). [. . . ] Level the washer dryer with the assistance of the four adjustable feet and a spirit level: q Loosen the lock nut 1 using the wrench. q Adjust the height by rotating the foot 2. q Tighten the lock nut 1 against the housing. 59 Connecting the power Caution Connect the washer dryer only to an alternating current via a correctly installed earthed socket. The mains voltage must correspond to the voltage specification on the washer dryer (nameplate). [. . . ]