User manual BOSCH XEOA REV 2-2010

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] While cutting, pay attention for "live" wires. While cutting, never guide your hand in front of the blade. Carrying power tools with your finger on the On/Off switch can lead to accidents. Secure the lock-off button each time after using the machine and before carrying out an inspection or maintenance. This safety measure prevents accidental starting of the power tool. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. Keep the battery charger away from rain or moisture. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Before each use, check the battery charger, cable and plug. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. Do not operate the battery charger on easily inflammable surfaces (e. The heating of the battery charger during the charging process can pose a fire hazard. Children should be supervised to ensure that they do not play with the battery charger. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1 On/Off switch 2 Lock-off button for On/Off switch 3 Blade guard 4 Blade 5 Guide edge 6 "Cut Control" cutting-line mark 7 Battery charge-control indicator 8 Handle 9 Socket for charge plug 10 Plug connector for charger 11 Charge cradle for battery* 12 Blade screw 13 Cutting adapter* *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Measured sound values determined according to EN 60745. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). [. . . ] Depending on the charge condition of the battery, excessive feed considerably reduces the performance capability. Always keep the blade free and clean of material remainders. The guide edge 5 may not become wedged during cutting and must be aligned parallel to the cutting surface. Thin materials, such as fabrics, can be pulled into the machine during cutting and become wedged. [. . . ]