User manual BOSE CINEMATE GS SERIES II

[. . . ] CINEMATE SERIES II CINEMATE GS SERIES II ® ® DIGITAL HOME THEATER SPEAKER SYSTEM Owner's Guide Guía de usuario Notice d'utilisation Guia dos proprietários Svenska Nederlands Français Italiano Español Deutsch English SAFETY INFORMATION Please read this guide Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this guide for future reference. The interface module is to be used only with the Acoustimass® module in the CineMate® system. [. . . ] On the remote keypad, enter the first device code for your brand of TV. Check that the TV source button blinks twice and turns off after the code is entered. Point the remote at your TV and press TV On-Off. If your TV does not respond, go back to Step 1 and try another code. Note: During programming, the five source buttons will flash rapidly three times if you press an invalid key or enter an unavailable device code. If this happens, go back to Step 1 and start over. 18 English Deutsch Español Français Italiano Nederlands Svenska CONTROLS AND INDICATORS Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one. Using the remote to watch TV Note: In order to control your TV and other audio/video devices using the remote control, you must first program the remote with a device code for each device. Press TV On-Off to turn on your TV and the CineMate® speaker system. The green LED on the front of the interface module will light. The button will flash to indicate that the remote control is in TV mode. TV source button To control a combination device · If you are programming the remote to control a combination device that has more than one source, such as a VCR/DVD unit, you can program the combination code into either remote control source. You may find it convenient to program the code twice ­ once for the VCR and once for the DVD. · To find the right device code, first search the "COMBINATION" listings in the universal remote device codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc. ). 3. Use the remote to select a channel and navigate menus. See "Using the CineMate® GS series II remote control" on page 21 for a complete description of the remote's buttons. In addition to controlling TV functions, the remote will control the basic CineMate speaker functions, such as turning on the speaker system, changing the volume, and muting or turning off the speaker system. 19 Svenska CONTROLS AND INDICATORS Nederlands Français Italiano Deutsch Español English Using the remote to watch a DVD Note: In order to control your TV and other audio/video devices using the remote control, you must first program the remote with a device code for each device. Press TV On-Off to turn on your TV and the CineMate® speaker system. The green LED on the front of the interface module will light. Press DVD On-Off to turn on your DVD player. The button will flash to indicate that the remote control is in DVD mode. Use the remote to control play options and navigate DVD menus. See "Using the CineMate® GS series II remote control" on page 21 for a complete description of the remote buttons. In addition to controlling DVD functions, the remote will always control the basic CineMate speaker functions, such as turning on the speaker system, changing the volume, and muting or turning off the speaker system. DVD source button Selecting the TV input Press TV·Video to select the correct TV input for the source you want to watch. [. . . ] Find your device and brand in the Universal Device Codes book. Try programming another code, then check the device for improved functionality. Sound is distorted · Make sure speaker cables are not damaged and the connections are secure. · Reduce the audio output level from the TV connected to the interface module. · Turn off your TV's internal speakers. [. . . ]