User manual BOSE MOBILE ON-EAR HEADSET

[. . . ] The complete Declaration of Conformity can be found at www. Bose. com/compliance. WARNING: DO NOT use mobile phone adapters to connect headset to airplane seat jacks as this could result in personal injury such as burns or property damage due to overheating. Remove and disconnect immediately if you experience warming sensation or loss of audio. ©2009 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. All trademarks referenced herein are property of Bose Corporation. 2 English Dansk Deutsch Español Français Italiano Nederlands Svenska USING YOUR HEADSET Introduction Thank you for purchasing the Bose® mobile on-ear headset. [. . . ] Each one is identified by a small symbol (circle, diamond, triangle) on the top of the plug. If your phone has a 2. 5mm headphone/headset jack, you will need to use one of these adapters. Refer to www. Bose. com/ phones to determine which adapter is compatible with your phone. Attach the adapter to the headset cable 3. Plug the headset with the adapter into the headphone/headset jack on the phone. Note: If your phone does not respond when you press the Answer/End button, you are getting partial or no sound, or the microphone is not pickingup sound, you may be using the wrong adapter. Refer to www. Bose. com/phones to determine which adapter is compatible with your phone. Answering and ending calls The Bose® mobile on-ear headset includes an easy to access Answer/End button with integrated microphone. Simply press the Answer/End button to perform an action. Note: Some phones may require you to press and hold the Answer/End button for a few seconds to perform functions. Answering calls When you receive an incoming call, press and release the Answer/End button to answer. Ending calls When you are ready to end your call, press and release the Answer/End button. Note: Some unique phone and music playback functions, like last number redial, voice commands, and track navigation are device-dependant, and may be accessible using the Answer/End button. Refer to your mobile phone user's manual to find out what features are available. 6 English Dansk Deutsch Español Français Italiano Nederlands Svenska USING YOUR HEADSET Wearing the headset After removing the headset from the case and unfolding the earcups (see page 4), put on the headset using the markings on the headband that identify the left (L) and right (R) earcups. Cleaning the headset Should cleaning be necessary, simply wipe the outside surfaces with a Earcup port damp cloth. Be sure the earcup ports are kept clear and that no moisture is allowed to get inside the earcup or microphone opening. Using the "enhancement" features of audio devices Many portable audio devices include features or settings which electronically alter the audio signal sent to the headset. These may include "bass boost" or other EQ settings. Other features may serve to limit volume out such as "sound check" or "volume limit. " Finally, other features add spatialization effects such as "Surround", "SMS", "WOW", or "3D. " The Bose® mobile on-ear headset was designed to deliver high quality, balanced sound and deep, low notes without the need for any artificial enhancement. Therefore, when using the headset we recommend that you first turn off all the enhancement features before making any personal adjustments to the audio settings. Reattaching earcup cushions If an earcup cushion becomes detached from the earcup: 1. Align the two holes on the back of the cushion with the two posts on the earcup. Press in around the outside edge of the cushion to snap it in place. Make sure the cushion is flush all the way around and that there are no gaps between the cushion and the earcup. 7 Svenska Nederlands Italiano Français Español Deutsch Dansk English REFERENCE Replacement parts and accessories Accessories or replacement parts can be ordered through Bose Customer Service. See the contact information for your area included in this guide. · · · · Carrying case Headset cord with inline microphone Mobile phone adapters Replacement Ear Cushion Kit Troubleshooting If you experience any trouble using your headset, try the following troubleshooting instructions. If you still need help, call for assistance. [. . . ] Make sure the microphone is not being blocked or covered. Note: The microphone is located on the back of the Answer/End button (you may notice the small opening for the microphone). Phone not responding Make sure you are using the correct mobile phone adapter and that it is securely when Answer/End connected. button is pressed Note: Some phones may require you to press and hold the Answer/End button for a few seconds to perform functions. [. . . ]