User manual BOSE VIDEOWAVE

[. . . ] Operating Guide Guía del usuario Guide d'utilisation VIDEOWAVE TM ENTERTAINMENT SYSTEM Svenska Nederlands Français Italiano Deutsch Español English Dansk 2 English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CONTENTS INTRODUCTION Welcome . Bose® click pad remote control overview . . 5 5 5 6 7 8 9 10 10 10 SPECIAL FUNCTIONS Changing the image view . . 18 18 18 USING THE iPOD SOURCE Selecting the iPod source . [. . . ] While "Video Settings" is highlighted, press and hold the OK button on the remote to access the basic video adjustments for the preset. Brightness, Contrast, Color, and Tint . . . . . . . . . . . . . . 0 to 100 (50* Bright), (50* Dark) Video Sharpness . . . . . . . . . . 0 to 10 (6* Bright), (3* Dark) Color Temperature . . . . . . . 1* to 3 Control Frame Sounds Provides audible feedback when you glide your thumb along the click pad or select a highlighted function. On*. . . . . . . . . . . . . . . . . . Sound accompanies the movement of your thumb on the click pad Off . . . . . . . . . . . . . . . . . . . Use the up/down navigation buttons to select the item. Use the left/right navigation buttons to adjust the value. Press OK to return to the OPTIONS menu. *Factory setting 25 TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English CHANGING SOURCE AND SYSTEM OPTIONS Gamma and color adjustments Note: We recommend that these adjustments be made by a qualified technician. Access the basic video settings as previously explained. Press and hold OK again to toggle between the basic video settings and the Gamma and color settings. Use the navigation buttons to adjust. Gamma. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -3 to 0* to +3 Adjusts the balance between the bright and dark areas of the picture Restore Original Settings Returns all settings to factory values. Automatic Off Determines if the system automatically turns off after 4 hours of no user interaction (no remote control button presses). Enabled*. . . . . . . . . . . . . . . . 4-hour time-out is on Disabled . . . . . . . . . . . . . . . . 4-hour time-out is off Note: The system will automatically turn off 15 minutes after you no longer hear: · Video and audio from a video source or · Audio from an audio source The 4-hour Automatic Off setting does not affect this function. Red, Green, and Blue gain . . . . . . . . . . . . . . . . . . . 0 to 100* Red, Green, and Blue cut . . . . . . . . . . . . . . . . . . . . . 0* to 100 *Factory setting 26 English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CHANGING YOUR SYSTEM SETUP UnifyTM system overview The intelligent integration system guides you through the initial process of setting up and configuring your system. It helps you to choose the right cables and inputs, and to program the click pad remote to operate your connected devices. After completing the initial setup, you can use the Unify system at any time to change your system setup and configuration. Unify system functions Resume initial setup This function is available only if the initial setup process is not completed. Selecting this function returns you to initial setup process at the last completed event. Restart initial setup This function is available only if the initial setup process is not completed. Selecting this starts the initial setup process from the beginning. Using the Unify menu To access the Unify system: 1. Press the Setup button (page 20) on the front of the control console to display the Unify menu. Use the navigation buttons on the remote to highlight the function you want. Press OK on the remote to activate the function. When you are done, select "Exit Unify" at the bottom of the menu. Note: To exit the Unify menu at any time or cancel the function you started to use, press the source select button on the remote, or the Setup button on the control console. Language This function allows you to change the language of the on-screen information. ADAPTiQ ® Selecting ADAPTiQ runs the audio calibration process that adjusts the system audio output for the best performance in your room. Play Bose demonstration Plays the Bose audio/video demonstration. [. . . ] Xbox is a trademark of Microsoft Corporation. Other trademarks are property of their respective owners. To obtain limited warranty service Contact Bose or your authorized Bose dealer. Technical information Remote control Frequency: 2. 4 GHz Range: 33 ft. (10 m) Control console power supply rating AC input: 100-240V 50-60Hz, 0. 5A (0, 5A) DC output: 12V 20W Max. Monitor rating AC input: 100-240V 50-60Hz 250W 37 TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English CARE AND MAINTENANCE "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ]