User manual BOSS BG200

[. . . ] Do not open covers and do not attempt to repair this product yourself. WARNING: - To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. - To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. - This device is intended for continuous operation. [. . . ] 2. Use cursor buttons ( / / / ) and the ENTER button to select the items you want on the menu. * On some discs, you can select the items with the numeric key. Multi-subtitle language function Some DVD discs have multiple subtitle languages, allowing you to select the subtitle language recorded on disc. Press the SUB-T button to switch between the different languages recorded on the disc. NOTES: REP 1: Only one track (file) is played repeatedly. REP DIR: A single folder of tracks is played repeatedly. REP CHAPTER: A chapter is played repeatedly. REP TITLE: A title is played repeatedly. REP ALL: An entire disc is played repeatedly. Note: The Repeat feature is not supported for VCD 2. 0 discs when PBC (Playback Control) is on. - Paragraph repeat play: Use this function when you wish to repeat play a desired paragraph. A-B repeat allows a selected passage to be playbed. The following information will be shown: Program play function Press PROG during playback to activate the programing editing interface as follows: For VCD/SVCD/CD: For DVD/MP3/MPEG4: This example indicates that you are currently viewing the first of three available camera angles. Press the ANGLE button to select a different angle. BG200 User's Manual - page 17 1) Use the / / / cursor buttons to select the item that you want to program. The item you selected will be highlighted. 2) Input the track number that you want to program using the numeric buttons (0-9) on the remote control. 3) Press the / / / cursor buttons to move to "PLAY" operation button and then press the ENTER button to program the playback sequence. On Screen Display function Press and hold the SUB-T button during playback to display information of the current disc on the screen: For DVD: PBC indication (only for VCD with PBC) Repeat playback indication : One track repeat playback : One directory repeat playback : The whole disc repeat playback : Exit repeat playback mode GOTO function Press GOTO button, the screen will display the following message. FOR DVD: FOR VCD/CD/MP3: For VCD/CD/MP3/JPEG: - To search for a particular title/chapter/ track 1. Use the / / / cursor buttons to move to / / . Use the numeric keys to input the desired Title/ChapterTrack, and then press the ENTER button to confirm. - To search for a particular point by playing time 1. Use the / / / cursor buttons to move to . [. . . ] The current disc has a "Parental Control" level, and the player's parental level is set below the level of the disc. To view this disc, you should enter the correct password to play the disc normally. NOTE: To set the "Parental Control" level, please refer to "Parental Control Level" on page 22. Playing a JPEG disc When preparing a disc of jpeg images to be shown using the DVD player, please note that following guidelines: · The recommended image size is 640 x 480 pixels. If a file is recorded at a higher resolution, the player must resample it, which will cause delays in displaying the image. BG200 User's Manual - page 24 Specification [ GENERAL ] Power Supply Requirements: DC 12 Volts, Negative Ground Chassis Dimensions: 7"W X 6. 3"D X 2"H Tone Controls: - Bass (at 100 Hz) - Treble(at 10 kHz) Current Consumption: (max. ) [ DVD PLAYER ] Signal to Noise Ratio: > 50 dB Channel Separation: > 40 dB Frequency Response: 20Hz - 20 KHz [ MONITOR SCREEN ] Screen: 3. 2 inch TFT LCD Number of pixels: 16, 777, 216 pixels Resolution: 959 X 240 pixels [ RADIO ] FM TUNER Frequency range: 87. 5 -107. 9 MHz IF: 10. 7 MHz >25dB Stereo Separation: AM TUNER Frequency range: 530 - 1710 KHz IF: 450 KHz +10 dB +10 dB 15 Ampere Maximum Output Power: 80W X 4CH BG200 User's Manual - page 25 Troubleshooting If it appears that your DVD unit is faulty, please first consult this checklist. [. . . ]