User manual BOSS BV10.4FT-FG-FB

[. . . ] SPECIFICATIONS Power Requirements Power Consumption Screen Size Screen Format Resolution Pixel A/V Inputs Dimensions IR Power Requirements IR Power Consumption IR Transmitter Frequency LCD Panel Type Compatible video standard DC 12V 9W 1 0 . [. . . ] Seek only a qualified service center or factory service center. Be careful not to drop or apply pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void! Use extra caution with any liquids in your car. If you or your child spills any liquid on these products, pull your vehicle to the roadside and turn the key off to disconnect or wipe the products with a towel. Do not operate the equipment until all liquids have either evaporated or you have had the monitor inspected at a service center by a qualified technician, Severe harm or danger can occur. Be careful not to overload your cigarette lighter plug by adding more than one device at a time. Use only a damp cloth to clean the screen and use only purified water on the cloth. Wring out all excess water prior to wiping the screen. Do not use any cleaners or chemicals to clean the screen. In most cases a dry cloth will do! 3 8 FEATURES AND CONTROLS PRECAUTIONS CAUTION POWER Button MENU Button Right Dome Light Button Quality installations are best performed by qualified and certifled installers. Watching the monitor for an extended period of time with the engine turned off may deplete the vehicle s battery. Don t touch the unit if there is a flash of lightning. It may receive an electric shock. Left Dome Light Button A/V select Button Up/Down button This product is designed for operation with a 12 Volt DC, negative ground vehicle. [. . . ] Refer to the connection diagram on page 8 for details. 3. Match the position of installation bracket and installation plate with screw A. Monitor (Front) AUX Input Jack 4. Secure the unit in place with the supplied screw B. Monitor (Rear) 5 6 [. . . ]