User manual BOSS BV6000

[. . . ] Integrated servo and MPEG-2 chip Enhances stability and improves audio/video performance HDCD (High Definition Compatible Digital) support This player supports the HDCD standard, a record/playback technology which uses a 20-Bit audio data rate to enhance digital audio performance. Picture CD and Photo CD support This unit is compatible with the Picture CD and Photo CD formats, without requiring any additional software. When a Picture CD or Photo CD disc is inserted, the appropriate media player will launch automatically. DVD Audio and DVD-R support Parental programming lock Freeze-frame, frame-by-frame, and slow motion playback Multiple aspect ratio switching between widescreen, letterbox and pan-scan display formats Switch between different audio tracks on DVDs (if available on disc) Multiple language subtitles (if available on disc) Multiple viewing angles (if available on disc) Last position memory Rear-view camera input function If you have connected a rear-view camera to the player's correct A/V input, when you put your car in reverse the video screen will automatically switch to a display of the scene behind your vehicle. BV6000/BV6850T User's Manual - page 2 What is included? When first unpacking your new DVD player, please check first that the package contains all of the items below. [. . . ] This is normal. Repeat Play options This player permits you to repeat portions of the disc you are listening to, using the 2 RPT button on the front panel (or 7 RPT on the remote control). In DVD Mode, pressing the RPT button steps through the following choices: REPEAT CHAPTER > REPEAT TITLE > OFF In VCD, SVCD, CD, and MP3 modes, pressing this button steps through these repeat mode choices: REPEAT TRACK > REPEAT ALL > OFF Soundtrack options The normal playback for this unit is stereo. Using the AUDIO button on the remote, you can change the way the two audio channels are played through your speakers. Pressing the AUDIO button steps you through the following choices: LEFT CHANNEL ONLY > RIGHT CHANNEL ONLY > STEREO BV6000/BV6850T User's Manual - page 14 Random Play options Pressing 3 RDM on the front panel (or 8 RDM on the remote) will cause the unit to playback all the tracks on the disc in a random sequence. To return to normal playback mode, press this button again. Please note: This function is only supported in DVD Karaoke, VCD, S-VCD and CD discs and only when PBC is turned on. When PBC is off, random playback is only available in VCD and SVCD discs. Setting A/V options available with the SELECT button Pressing the SELECT knob (or button, on the remote) allows you to step through a variety of audio and video parameters you may wish to adjust to enhance your viewing experience: BASS > TREBLE > BALANCE > FADER > LOUDNESS > COLOR > CONTRAST > BRIGHTNESS Press the SELECT knob (or button) to step to the desired item to adjust, and use the Volume knob to adjust the setting within the OSD menu. After 10 seconds of inactivity, the unit will return to normal operation. Soundtrack options The normal playback for this unit is stereo. Using the AUDIO button on the remote, you can change the way the two audio channels are played through your speakers. Pressing the AUDIO button steps you through the following choices: LEFT CHANNEL ONLY > RIGHT CHANNEL ONLY > STEREO BV6000/BV6850T User's Manual - page 15 MP3 Playback MP3 is an extremely efficient audio compression method which allows the storage of a very large number of songs on a single CD disc. There are three methods of selecting and playing a song from an MP3. Audio and Digital Audio output control This function displays the current language selected for the audio track. Using the LEFT/RIGHT arrow buttons and the ENTER button, you can choose a different language (if available). Subtitle language control This function displays the current language selected for subtitles. Using the LEFT/RIGHT arrow buttons and the ENTER button, you can choose a different language (if available) and turn subtitles on or off. Angle control This function displays the current viewing angle. If the disc supports alternate viewing angles, you can use the LEFT/RIGHT arrow buttons (OR the ANGLE) button and the ENTER button to select a different viewing angle. Sound control This function displays the current viewing angle. If the disc suports different audio modes, you can use the LEFT/RIGHT arrow buttons and the ENTER button to select between normal and 3D surround sound effect mode. BV6000/BV6850T User's Manual - page 17 DVD-VR Control Menu When a DVD-VR disc is playing and you press the MENU button, the on-screen menu system provides you with the opportunity to control the playback of the program. Use the UP/DOWN buttons to scroll through the options below: Group control This function displays the current group number and the total number of groups on the disc. Using either the LEFT/RIGHT arrow buttons or the numeric keys, the user can jump to the group desired and press ENTER to confirm. Track control This function displays the current track number and the total number of tracks on the disc. [. . . ] If it does, take your player to a qualified service technician for repair. Player controls do not function properly. Internal error causing malfunction. Shut the player OFF. Wait ten minutes, then turn the unit on and see if problem continues. If it does, take your player to a qualified service technician for repair. BV6000/BV6850T User's Manual - page 25 Troubleshooting If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous page. If problems persist, read the following troubleshooting tips which may help eliminate the problems. [. . . ]