User manual BOSS BV7950

[. . . ] 5 Detaching the control panel . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . 8 Electric Connection . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Touch screen VOLUME+ Touch the screen the VOLUME+ to increase the volume level . Touch the screen the VOLUME- to decrease the volume level . Ejecting The Disc Use your singer touch the range on touch screen , the control panel of the unit will swing downwards . Then you can insert the disc or eject the disc . (You can also press the button on the front panel to eject the disc or insert the disc to start play . ) VOLUME- Mute Function Use your finger touch the section , it will mute the sound but the disc continues playing. Setting The Clock CLK Select Sources MOD Touch repeatedly the MOD section on the screen, the signals will display in the screen as follow : DISC AUX IN RADIO Touch the CLK section on the screen and hold for about 2 seconds the hour will flash , rotate the VOL+/- to adjust . Touch it again, the minute will flash, then use the VOL+/to adjust . Volume Adjusting Volume button Setting The Buzzer ON/OFF Buzzer A Revolve : clockwise to increase / Anticlockwise to decrease . Touch the SEL section on the touch screen to select the BUZZER item, and then touch the VOL+/- (or rotate the vol+ /vol-) to switch the BUZZER ON/OFF . Setting Blue-tooth ON/OFF B Press the VOL+/- on remote control , to change the volume level . 16 SEL Touch the SEL section on the touch screen to select the Blue-tooth item, and then touch the VOL+/- (or rotate the vol+/-) to switch the Bluetooth ON/OFF . Basic Operation TFT Monitor Adjustment During DISC playback, use your finger touch briefly the SEL section on the screen (or press SEL button on front panel ) to across the Picture mode selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Rear View Camera When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only. ) Audio Quality Adjustment During DISC playback, use your finger touch briefly the SEL section on the screen (or press SEL button on the front panel ) to across the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . Swing the SEL knob in direction (or touch the " " section briefly) to decrease frequency by one step of channel spacing . VOLUME+ LOC APS ST/MON Automatic Search During Radio mode, swing and hold (for about 2 seconds )the SELknob in / direction (or touch the / section long) to start search for a radio station automatically . Touch it to select the other item, it will display the following as below : FM1 ST 106. 30 MHz DX TA CH 6 When an FM stereo broadcast is hard to receive ST/MON LUD SWF SWF LUD TA POP DISC DSP 11:08 CLK AF PTY Touch the ST/MON section on touch screen (or press ST/MO button on the remote) to select the MONO or STEREO mode . Touch it to previous . 19 ( When Stereo mode is activated, the ST symbol will appear . ) Radio Operation To tune in strong-singnal FM Station only (LO/DX function) Touch the LOC section on the touch screen (or press LO/DX button on the remote) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . ) LOC Automatic Memory Storing & Program Scanning Automatic Preset Setup In Radio Mode, Touch and keep the APS section on the touch screen (or swing and hold the SEL knob in direction of the APS/DISP) for about 2 seconds to active automatic station storage. The radio searches within the current frequency band, e. g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . APS Storing Stations In Memory Setting Memory Press the /CH 1-6 button repeatedly on the front panel to preset stations at radio mode . ( Or touch the screen the 1-6 sections ) FM1 ST DX Scan Function In Radio mode, briefly touch the APS section on the touch screen (or swing the SEL knob briefly in the APS/DISP direction) , the radio briefly plays all the preset stations of the frequency band . APS 106. 30 MHz TA CH 6 LUD 1 4 SWF 2 5 POP 3 6 DISC 11:08 MOD BND RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : FM1 ST DX Touch to preset station With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. [. . . ] . Selected playback mode Touch the screen, it will display the following as below : ( when the parking brake is applied . ) MP3 LUD 10-0:44:36 SWF MP3 01-0:44:36 POP DISC 11:08 MOD VOL- SEL VOL+ Touch repeatedly ENT Touch the / / / sections on touch screen (or Use / / / on remote control ) to select the item or folder, then touch the ENT section (or press ENTER button on remote) to confirm. Touch the RPT on the touch screen (or Pressing REPEAT button on the remote) repeatedly can select two kinds of repeat play mode. REP-ONE: Play the same song over and over again. [. . . ]