User manual BOSS BV9200

[. . . ] USER'S MANUAL page CONTENTS General and safety precautions Features What is included?Front panel controls Remote control features Remote control battery replacement Video quality settings DVD or CD changer control Setup menu structure System wiring: BV9200 In-Dash Double-DIN DVD/MP3/CD AM/FM Receiver with 6. 5" TFT Monitor and Built-in TV Tuner 2 3 3 4 6 8 9 9 Congratulations on your purchase of a Multi-media Receiver with Monitor. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will afford you years of listening pleasure. Thank you for making your choice for car audio entertainment! 10 11 12 13 14 14 15 16 16 17 20 Speaker connections Audio connections in amplified system Power and antenna connections Connections to multi-disc changer Basic operations Auxiliary video input connections Auxiliary video output connections TV antenna connections Troubleshooting Specifications BV9200 User's Manual - Contents General precautions Before installing and using your new BME component, please become familiar with all the information contained in this manual. [. . . ] To stop at a desired station, press the Scan button again. In CD mode, pressing this button will cause the unit to play the first 10 seconds of 12 BAND In Radio mode, a SHORT press of these each track on the disc. To stop at a desired buttons will cause the unit to advance station, press the Play/Pause button. among the bands available in the NOTE: This function is not available in following sequence: DVD/MP3 Mode. 10 REPEAT FM1 > FM2 > FM3 > AM1 > AM2 > FM1 Use this button to select a repeat playback 13 RANDOM (LOC/RANDOM) mode. Press repeatedly until you have In Radio mode, this button is used to selected the repeat mode desired. select between Local (LOC) and Distant radio reception modes. The choices vary depending on the type of disc you are playing: In DVD, VCD, CD or MP3 modes, pressing this button will cause the DVD Playback modes: tracks or titles on the disc to play in REPEAT CHAPTER > REPEAT TITLE > random order. REPEAT ALL > REPEAT CANCEL CD/VCD Playback modes: REPEAT SONG > REPEAT ALL > REPEAT CANCEL 14 PAL/NTSC In DVD/VCD mode, a SHORT press of these buttons will cause the unit to advance to through the different video output modes in this sequence: AUTO SELECT > PAL > NTSC MP3 Playback modes: REPEAT SONG > REPEAT SPECIAL > REPEAT ALL > REPEAT CANCEL 11 SEEK (>>I and I<<) These buttons are used in both the Radio and DVD modes. In Radio mode, press and hold these buttons for 3 seconds to make the receiver scan until it finds the next strong station on the dial. To tune a station manual, press and release quickly to move up one frequency step at a time until you reach a desired station. 15 L/R (Soundtrack options) In VCD and CD mode, a SHORT press of this button will cause the unit to advance to through the different audio output modes in this sequence: LEFT SOUNDTRACK > RIGHT SOUND TRACK > THREE DIMENSIONAL SOUNDTRACK In DVD mode, a SHORT press of this button will cause the unit to advance to display and advance through the different soundtrack options available on the particular disc you are watching. BV9200 User's Manual - page 5 1 2 3 4 Remote Control 1 POWER Press POWER to turn unit ON. Press again to turn it OFF. PWR MUTE DSP SOURCE 3 16 17 18 19 20 2 MUTE Press this button to switch off the audio during playback. To dim or turn off the display in Radio mode: Press and hold this button for 3 seconds to dim it. Press and again for 3 seconds to turn off the display. Press and hold again to turn it back on. To turn off the display in TV, DVD, CDC or AUX IN mode, press and hold this button for 3 seconds to turn. Press and hold again to turn it back on. 5 6 7 8 9 EQ SEEK+ LOUD BAND P/N VOL­ SEL VOL+ LOC RDM 0 1 SEEK­ 10+ 3 6 9 PROG ST ABC DEF 2 5 8 GHI JKL 4 MNO PQRS TUV 7 WXYZ SPACE GO TO 21 22 23 24 25 26 27 10 11 12 13 AMS RPT TITLE AUDIO SUB-T PBC SLOW ANGLE 3 DSP (Time Display) Press this button to display the current time of day. ENTER SETUP 14 15 OSD ZOOM 4 SOURCE Press this button to display the current time of day (Note: The BV9200 will only display time in 24 hour clock mode). 6 SEEK (>>I and I<<), continued 5 EQ Pressing this button permits you to choose one of the three preset equalizer curves. A LONG press of the button in DVD mode will cause the player to seek forward or backwards on the disc at a higher rate of speed. The first press will make the unit seek at 2X speed. Additional pressing of the button will yield seek speeds of 4X, 8X, and 32X (press again and seek speed returns to normal playback). 6 SEEK (>>I and I<<) These buttons are used in both the Radio and DVD modes. In Radio mode, press and hold these buttons for 3 seconds to make the receiver scan until it finds the next strong station on the dial. To tune a station manual, press and release quickly to move up one frequency step at a time until you reach a desired station. In DVD, CD or MP3 mode, a SHORT press of these buttons will cause the unit to advance to the next or last track (or chapter) of the disc. 7 VOLUME UP/DOWN Use these buttons to adjust volume to desired level. 8 SELECT This button is used to enter and confirm settings and selections made when using the on-screen display. 9 0-9 NUMBER KEYS Use these buttons for entering numerical information for various items in the on-screen menus. BV9200 User's Manual - page 6 10 AMS/RPT BUTTON In Radio Mode, pressing this button allows you to sequentially browse the preset radio stations. In TV mode, press this button to change the soundtrack mode. In DVD, VCD, CD or MP3 modes, pressing this button will cause the tracks or titles on the disc to play in random order. 26 SETUP Pressing this button opens up the SETUP menu, which permits you to make various system settings (described on page 9). 24 ZOOM If your DVD disc supports zooming into the image, pressing this button will provide this function. BV9200 User's Manual - page 7 Remote Control Battery Replacement The remote battery is held in a small "drawer" on one edge of the remote. [. . . ] Make sure the vehicle cabin is at room temperature. The display brightness is automatically reduced when the headlights are on. Adjust Color and Tint controls. Display color is light or pale. Video image is poor when other video source is connected. Display color is incorrectly adjusted. [. . . ]