User manual BOSS CAP2R

[. . . ] Failure to observe this may cause malfunction due to the precise mechanism of this unit. Use Authorized Service Centers Do not attempt to disassemble or adjust this precision product. Please refer to the Service Center list included with this product for service assistance. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. [. . . ] And you can press and hold button on the front panel for several seconds to pause the playback, Press and hold it again will return to normal palyback. VCD/CD/MP3: Normal Playback X2 X4 X8 20 SETUP REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 1)Press RPT button repeatedly to select different repeat modes. 2)For different kinds of disc, pressing RPT button has different effects. Chapter Track bookmark. 2) If you want to watch the section that you just set a bookmark, press GOTO button, then press / buttons to move the cursor to the desired number of the bookmark, and press or OK button on the remote control or ENT on the front panel to confirm. 12345---- Title All Off Off DVD Note: REPEAT feature does not support VCD2. 0 (with PBC ON). A-B Paragraph Repeat Play: When you want to repeat playing a desired paragraph. A-B repeat allows a passage to be repeated continuously. 1) Press A-B button first at the start of the. required passage. A- VCD/SVCD CD/MP3/ WMA 2) Press A-B button secondly at the end of the passage. A-B 3) Then the unit will repeat playing the passage you just set from A to B. 4) To revert to normal playback, press AB button again. Off !NOTE: You can press BOOKMK button repeatedly to set 9 bookmarks, Then press GOTO button and use / and /OK /ENT to confirm the track you have marked. And you can use numeric buttons (1-9) to select the track directly. When show the picture in full screen, the control bar will be shown on the screen. 3/15 90º 90º Prev Next Stop Press or button on the remote control or on the front panel to rotate the picture 90º counter-clockwise or clockwise. Press / button on the remote control or on the front panel to skip to the previous or next picture. Press CLEAR button to hide or display the control bar. (Speed) button in the middle · The area is used to adjust the display interval speed between the pictures. Press / buttons on the front panel or on the remote control to switch between ">", ">>", ">>>"and " ". SETUP 4) In Movie page, press or OK button on the remote control ENT button on the front panel to open the highlight folder in the play list or play the corresponding file. Music List Photo Movie 1-14053_2mpeg 2-BB_MPEGYEMANNVYOU. mpe 3-badluck. mpeg NOTE: For audio CD, the play interface and operation is similar with the Music page operation. For details, please refer to the description of Music page above. Display When the TFT panel is drawn in, Press the DSP button on the front panel or on the remote control during playback to display the contents of the current disc on the LCD display. 23 SETUP Example: MP3: (1) Press DSP for the first time will display the elapsed time of the disc: 00 : 00 : 55 (2) Press DSP for the second time will display the clock: 01 : 17 (3) Press DSP for the third time, the massage will resume: MP3 T 01 01 : 12 (3) Press DSP for the third time: The message on the screen will be resume: DVD ROOT Multi-audio language function For DVD Press AUD on the remote control during playback. Each time the button is pressed, the audio soundtrack language changes on sequential order. Notes: - The language number is different according to the disc. - Some discs only contain one language soundtrack. - When no different language soundtrack will be displayed at are recorded, screen left top corner. [. . . ] Only qualified service personnel can remove the cover or service this player. NO POWER · Check if the on/off button on the front of the player is set to on. · Check if the power plug of the mains unit is properly connected. · Check if there is power at the wiring harness. . [. . . ]