User manual BOSS CH123DVC

[. . . ] The manual should be saved and kept on hand as a convenient reference. About the Symbols and icons in this manual · · Text in square brackets [ ] refers to buttons on the panel of the CH123DVC. [EXIT]: EXIT button [UTILITY]: UTILITY button Reference such as (p. **) indicate pages in this manual to which you can refer. Indicates information that you should be aware of when using the CH123DVC. [. . . ] Press [EXIT] and [UTILITY] several times to make the display indicate fig. Disp-mastering-mode. eps . The CH123DVC is now in Mastering mode. What is Mastering Tool Kit?When creating an audio CD from your recorded songs, or recording to a similar media, the overall volume needs to be restrained, so that even the loudest portions of the songs are handled appropriately on the CD. However, this often results in an overall lowering of the volume, resulting in a CD that lacks excitement and impact. With the "Mastering Tool Kit, " however, you can smooth out the differences in volume that occur over the course of a song, while also correcting the balance. We recommend mastering with the Mastering Tool Kit in the final stage of creating songs. The Mastering Tool Kit features · 10 pre-programmed "Preset Patches" (P01­ P10) · 10 rewritable "User Patches" (U01­U10) · 10 "Song Patches, " which are stored individually for each song (S01­S10). fig. 03-020 2. Use CURSOR [ ][ ] to move the cursor to the V-track indication, and use VALUE [-] [+] to select the recordingdestination V-track. Recording Destination V-Tracks with recorded data. fig. Disp-master-v-tr. eps 3. Press [EFFECTS]. The mastering tool kit selection screen appears. fig. Disp-FX-MT-P01. eps 4. Use CURSOR [ ][ ] and VALUE [-] [+] to select the patch you want to use. Select the desired patch number from the preset, song, or user patches. Press [EXIT] to return to the mastering screen. Use CURSOR [ ][ ] and VALUE [-] [+] to adjust the MasterLevel. If you want to cancel this operation, press [EXIT]. Press [TR4] (YES), and the track data will be converted to MP3 or WAV. The converted audio file will be saved in the MP3 folder. 101) The mastering data has been converted, you're returned to the mastering screen. You can listen the converted audio file in MP3 mode. Using effects fig. Disp-PREAMP-OnOff. eps Editing the Mastering Tool Kit settings If you want to create new settings, select the existing patch that's closest to what you have in mind, then modify (edit) those settings. If you want to save your edited settings, you can save them as a user patch or a song patch. Press [EXIT] and [UTILITY] several times to make the display indicate 2. The mastering tool kit selection screen appears. Use CURSOR [ ][ ] to move the cursor to the parameter that you want to edit, and use VALUE [-] [+] to edit the values. If there are other parameters that you want to edit, use CURSOR [ ][ ] to move the cursor to each parameter, and use VALUE [-] [+] to edit the value. If you want to edit another effect block, press [EXIT] and then repeat steps 5­7. fig. Disp-mastering. eps If you want to save the current effect settings, refer to "Saving the mastering tool kit settings (Write)" (p. [. . . ] 71 VOCAL MULTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 71 V-track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 40 W Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]