User manual BOSS CHAOS SE600

[. . . ] A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). There are paste residue. [. . . ] When in USB or SD / MMC source, if the USB or SD / MMC is being removed, unit will automatically switch to radio source. SUB-WOOFER ON/OFF Press SOURCE button for more than 3 seconds to activate or turn off the Sub-woofer (Sub-woofer on/off is an optional feature). 19) FRONT (AND REAR PANEL) AUXILIARY INPUT JACKS This unit features AUX IN line input jacks on both the front (headphone type) and rear (RCA type) panels. AUX IN JACK IN PANEL PLEASE NOTE: These two inputs cannot be used simultaneously. If you have a source unit plugged into the rear panel jack and wish to listen to a portable device (such as an MP3 player) by using the front panel jack, be sure to power off the unit plugged into the rear unit to Left Audi o avoid interference. Right Audi o Gr ound Similarly, if you have a device plugged into the front panel jack and wish to listen to the unit plugged into 3. 5mm Audi o In Cabl e (not in cluded) the rear panel, be sure to turn off the front panel device. To select either the front or rear AUX IN device as a listening source, press the SOURCE button to select AUX mode. To cancel AUX IN listening, press SOURCE again. 1 2 3 RESET BUTTON The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a ballpoint pen or metal object will activate it. The reset button is to be activated for the following reasons: Initial installation of the unit when all wiring is completed. All the function buttons do not operate. Press these buttons for more than 2 seconds, operate as MANUAL SEARCH buttons, under this mode the tuning frequency will advance up or down rapidly when the button is pressed. If the buttons are not pressed within 3 seconds, they will return to auto search mode. 8) MONO STEREO BUTTON (MO/ST) When you receive a station, "ST" on the display will be on. Flip open the USB plastic cover, and the USB socket will become accessible. A 0. 5mm USB cable is included with this unit. Please connect the USB drive /device to the unit thru the USB cable as indicated in picture (P . 2), and the display will show "USB PLAY". . . . . . . . . the download has begun. P . 2 NOTE: 1 Mini USB to big USB extension cable 2 The unit may take a while to detect or download the USB files, detect & download time may vary depends on the type of USB drive / device. 3. Does not matter the unit is in what mode (TUNER, CDC, CD, SD/MMC, etc), once a USB drive / device is being plugged into the unit, unit will automatically switch to USB mode. 4. All the USB files playback function is same as normal CD or MP3 disc playback. (Please refer to section CD operations & MP3 operations) TO STOP USB PLAYBACK 1. The USB drive / device is unplugged, the unit automatically switch to radio mode. Or user can use mode button to switch to other mode. 2. User can use the mode button to choose USB mode (only if USB drive / device is inserted in the unit ) or any other modes, when they are in any mode. USB 1. 1 > 320KBPS FILE MANAGE: FAT12 / FAT16/ FAT 32 P . 3 WARNING 1. [. . . ] (2) SEARCH DIRECTORY BY USING VOLUME KNOB Under MP3 play mode, press MP3 MENU BUTTON three times, Then the first Directory name is shown. Rotate VOLUME KNOB counter-clockwise first to navigate through the directory list, press MP3 ENTER BUTTON to select the desired directory. To select the tracks under the selected directory, by Rotating VOLUME KNOB counter-clockwise first, then press MP3 ENTER BUTTON to confirm when desired track is found. (D) NAVIGATING THROUGH DIRECTORY BY USING M5/M6 BUTTON Press directory up (M6) or directory down (M5) buttons to skip the current directory forward or backward by one position. In a multi-level directories disc, the movement will take place at the current level until the last directory is reached. [. . . ]