User manual BOSS DIABLO D550.4

[. . . ] [START] [REC] START button REC button · Reference such as (p. **) indicate pages in this manual to which you can refer. Copyright © 2001 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. USING THE UNIT SAFELY Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. [. . . ] Tap the key pad with the note to be recorded. At this time, the velocity (the force used to tap the key pad) is also recorded. The recording automatically advances by one step. "To Record Long Notes in the Bass Part" (p. 58) x You can record over a wide range of pitches by using the Fret Shift function (p. x You can check a sound, playing but not recording it, by holding down [VOICE] and pressing the corresponding key pad. * You cannot play rolls and flams in bass parts. * You cannot record multiple notes to the same pad number at the same step. Even if multiple notes are layered in a recording, only one sound is played (with the last selected note played). * If necessary, change the Quantize settings for recording (p. The REC indicator goes out. Step at which recording begins b. Turn the TEMPO/VALUE dial to select the pattern number. * You can also select the pattern by inputting the pattern number with the numeric keys and pressing [ ]. * When selecting a fill pattern, press [FILL]. Hold down [SHIFT] and press [3] (CLEAR). * Continue to hold down [SHIFT]. fig. 03-22 4. If you are sure you want to clear the data, while still holding down [SHIFT], press [ ]. Deletion of the User pattern is executed, and when it is finished the display will indicate "DONE. " 5. When the data is all cleared, release [SHIFT]. * To cancel the operation, release [SHIFT]. * If the selected pattern has not been recorded yet (has no data recorded to it), "DATA EMPT" is displayed without the deletion being executed. Data to be cleared 3. While continuing to hold down [SHIFT], rotate the TEMPO/VALUE dial to select the data to be cleared. [. . . ] 86 T Tap Tempo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Tempo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 50 Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 U User Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]