User manual BOSS DIABLO DC126D

[. . . ] A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). There are paste residue. [. . . ] "Subwoofer On" will appear in the display for 5 seconds, and the SUB-W icon will appear and remain in the display. Press iX-BASS again for more than 3 seconds to turn the subwoofer off. "Subwoofer Off" will appear in the display for 5 seconds, and the SUB-W icon will disappear. Press the volume control twice, then rotate it clockwise or counterclockwise to adjust the Subwoofer level from 0 to 12. Bass Press the volume control three times, then rotate it clockwise or counter clockwise to adjust Bass from -6 to +6. "0" represents a flat response. Treble Press the volume control four times, then rotate it clockwise or counter clockwise to adjust Treble from -6 to +6. "0" represents a flat response. E-8 Balance Press the volume control five times, then rotate it clockwise or counter clockwise to adjust the balance between the right and left speakers from R12 (full right) to L12 (full left). "C00" Represents a center balance level between the right and left speakers. Fader Press the volume control six times, then rotate it clockwise or counter clockwise to adjust the fader between the front and rear speakers from R12 (full rear) to F12 (full front). "C00" Represents a center fader level between the front and rear speakers. PRESET PRESET 1 PRESET 4 PRESET 2 PRESET 5 PRESET 3 6 8) IX-BASS BUTTON (IX-BASS) Press iX-BASS momentarily to activate the iX-BASS feature. E - 10 Personal Text Message Press the MENU button you will see the "PTM" on the display , this will allow the user to input his favor . greeting note on the display. The "INPUT MESSAGE" will be displayed by default. 20 letters or symbols for the "PTM" to be displayed on the LCD. When "PTM" is displayed on the display, Press "ENTER" button to start up the "PTM" enter procedure. Rotate the encoder volume to input A to Z 0-9, +/- !Press "ENTER" button to confirm the first letter input. Repeat the procedure enter the rest of the letters . If you want to change the inputted letters , you can press Tuning up /down button to move, the cursor backwards to change the inputted letters. If no more buttons are pressed, after 7 seconds the inputted letters will be automatically set as PTM. The previous PTM will be erased automatically once a new PTM is entered. Press "DISPLAY" button sequential (Frequency -> Spectrum -> Animation 1 -> Animation 2 -> PTM ). [. . . ] Other Features Pause Repeat Random Intro Scan and Track Select features during CD changer play are accessed in the same methods as for regular disc play. Refer to the CD Player Operation Section of this manual for details. E - 14 11. REMOTE CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 OPERATIONS: Key 1. Track Up/Down Radio Mode Power On/Off CD Player Mode Power On/Off CDC Player Mode Power On/Off Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal Tuning/Seek Up/Down Track Up/Down Track Up/Down 6. Xbass(Xbs) & Xbass & Sub-woofer(SUB-W) Sub-woofer Xbass & Sub-woofer Preset EQ CD Eject Display Clock, Spectrum Or animation or PTM/menu function Xbass & Sub-woofer Preset EQ CD Eject Display Clock, Spectrum Or animation or PTM/menu function 7. [. . . ]