User manual BOSS GT-6B

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the BOSS GT-6B Bass Effects Processor. Before using this unit, carefully read the sections entitled: · USING THE UNIT SAFELY (page 2­3) · IMPORTANT NOTES (page 4) These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. s Printing Conventions in This Manual · Text or numerals enclosed in square brackets [ ] indicate buttons. [. . . ] Press PARAMETER [ ][ display the following screen. fig. 05-01 ] in the Play screen to * When bypass is in effect, you may be unable to control the volume level with the expression pedal. In such instances, set Bypass EXP Mode to "On" (p. 55). Setting the Range of the Volume Change 2. Press PARAMETER [ ][ ] to move the cursor, and turn the PATCH/VALUE dial to select the effect to be assigned to the pedal. The effects that can be assigned to each pedal are shown below. Number 1: COMP/LIMITER or WAH Number 2: OD/DIST or FX-1 Number 3: CHORUS or FX-2 Number 4: This pedal is a dedicated PEV/DLY pedal. However, when selecting Sound On Sound with the REV/DLY FX Select (p. 27), the Sound On Sound control function is automatically assigned to this pedal and the CTL pedal. 54 for more information when using this function. * The name and on/off status of the selected effect appear in the display in capitals when the effect is on, and in lowercase when the effect is off. * Each of the effect names indicated in the display are the actual effect names as selected with FX Select and other controls. To save the settings, perform the Write procedure (p. Press [EXIT] to return to the Play screen. 20, 31) or FX-2 "PB" (Pedal Bend: p. 20, 38) is on, the expression pedal automatically functions as a "pedal wah" or "pedal bend. " * When these are off, the expression pedal automatically functions as a "volume pedal. " You can set the minimum and maximum values determining the range over which the volume level changes when you move the expression pedal. Press PARAMETER [ following screen. fig. 05-02 Chapter 5 ][ ] to display the (Setting the minimum value) (Setting the maximum value) fig. 05-03 3. Rotate the PATCH/VALUE dial to set the value. To save the settings, perform the Write procedure (p. Press [EXIT] to return to the Play screen. 45 Chapter 5 Setting the Pedal Functions (Pedal Assign) If You Don't Want to Use the Expression Pedal as a "Volume Pedal" Use the procedure below to turn the expression pedal off. Press PARAMETER [ ][ ] a number of times until you have one of the following screens displayed. fig. 05-04 Settings for Using the Expression Pedal Switch/CTL Pedal Making Settings Instantly (Quick Settings) Quick Settings is a function that lets you set the most appropriate values for related effect parameters instantly, just by selecting the preset "pedal settings. " This greatly reduces the hassle of selecting and setting parameters one by one. Pedal Settings for the Expression Pedal Switch Select the parameter to be controlled when you press down on the toe of the expression pedal. Press [PEDAL ASSIGN] once more, to set it to "Off. " 4. To save the settings, perform the Write procedure (p. [. . . ] Wave Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X XLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 80 MEMO 81 MEMO 82 For EU Countries CAUTION Apparatus containing Lithium batteries Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. [. . . ]