User manual BOSS MARINE REMOTE SIZE ROUND

[. . . ] Use Authorized Service Center Do not attempt to disassemble or adjust this precision product. Please contact Boss Audio for all service. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Washing the Car Do not expose the product to water or excessive moisture. [. . . ] Then you can change the minutes according to the operation described above. MUTE Press MUTE button on the front panel or MUTE button on the remote control to mute down the sound instantly. Volume Level Adjustment Pressing VOL+/- buttons on the front panel or VOLUME +/- on the remote control to increase or decrease the volume level. EQUALIZATION Press EQ button shortly to turn on equalization function and to select desired audio mode. There are four kinds of mode as below: FLAT CLAS POP ROCK EJECTING A DISC Press (EJECT) button on the DVD unit or on the remote control to eject the disc. FACEPLATE RELEASE ) button on the front panel Press REL ( to detach the removable faceplate. SOUND ADJUSTMENT Press SEL button on the front panel of the unit or on the remote control to select the desired adjustment mode. The adjustment mode will change in the following order: VOL (Volume) BAS (Bass) TRE (Treble) BAL (Balance) FAD (Fader) By pressing the VOL+/- buttons on the 15 SUBWOOFER Press EQ (SW) button on the front panel for several seconds to toggle subwoofer output. Press it for several seconds again to release this mode. MODE SELECTION Press MODE button on the front panel of the unit or MODE button on the remote control to select among radio, disc GENERAL OPERATION (DVD/VCD/CD/MP3) play mode and AV IN mode. LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display of the front panel. to or T-UP to skip to the next Press or T-DN to skip to the track, and press previous track. Note: For some VCD2. 0 discs (PBC/ buttons or Tplayback control), UP/T-DN buttons may be unavailable. DVD VIDEO MENU PLAY When playing a DVD disc in the DVD player: 1) The disc will be played automatically and stop at menu picture. 2) Use / , / cursor buttons to move between the highlight bars in the menu. 3) Press OK button to confirm the selected item. MENU FUNCTION Press the MENU button on the remote control during DVD mode will return to the menu stored in the current disc. ADVANCED OPERATION REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEAT button on the remote control or RPT button on the DVD unit repeatedly to select different repeat modes. 2) For different kinds of disc, pressing REPEAT/RPT button has different effects. For DVD: REP:[OFF] REP:[CHAPTER] REP:[TITLE] BOOKMARK, A-B, PROGRAM and GOTO functions are unavailable. ON­SCREEN DISPLAY FUNCTION Press the DISPLAY button on the remote control or DSP button on the DVD unit during playback to display the console information of the current disc on the screen. FOR DVD: Once you press DISPLAY/DSP button you will see the information as the following order. [. . . ] Press MUTE again, sound will resume. 21 TROUBLE SHOOTING If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. [. . . ]