User manual BOSS MR1515B-ROUND REMOTE-

[. . . ] Congratulations on your purchase of a R Audio Systems Compact Disc Receiver. This product has been designed and built to deliver the highest quality audio reproduction while impervious to the harsh conditions of the marine environment. We are sure you'll enjoy listening to your favorite music with this R component as part of your car audio system. For best results please consult a professional mobile electronics installer for application advice or troubleshooting. [. . . ] Each time the unit is turned on it will go to this volume level. · FACEPLATE RELEASE Press OPEN button (7) to slide down the removable faceplate. 11 · SOUND ADJUSTMENT Press SEL button (10) to select desired audio mode. The adjustment mode will change in the following order. Volume Bass Treble Balance Fader By pressing VOL button (11) or VOL (12), it is possible to adjust the desired sound quality. · AUDIO ACKNOWLEDGEMENT When you press some of the control buttons an audible "beep" will sound so you know you pressed a button. OPERATION Press and hold SEL button for 2 seconds to turn this function on/off. · LOUDNESS Press LOUD/DIM button (15) to enhance bass response at low volume levels. Press this button again to defeat the function. · ILLUMINATION Press LOUD/DIM button (15) for more than 2 seconds to adjust the brightness of the LCD display backlight. · MUTE In radio/AUX IN mode, press /MUTE button (3) to mute audio level. Press the button again to release mute function. · SELECT MODE Press MODE button (6) to choose desired listening mode. radio mode to CD mode to CDC mode to AUX IN mode. · SET THE CLOCK Press DISP button (1) for more than 2 seconds until the clock is shown on the display and flashes. Then press the button (17) to change minutes or button (16) to change hours. · DISPLAY PRIORITY Clock Priority Press and hold DISP button (1) while pressing button (16) to select Clock Priority. Pressing DISP button (1) while in Clock Priority will temporarily display selected station frequency (in RADIO mode) or track number (in CD/CDC mode) or state information (in AUX IN mode). · Frequency Priority Press and hold DISP button (1) while pressing button (17) to select Frequency Priority. Pressing DISP button (1) while in Frequency Priority will temporarily display clock. · SELECTABLE CLOCK DISPLAY Programs the unit to display the time when the unit is turned off. While the unit is turned on, press and hold the MODE button (6). Then use the M2 button to activate or defeat this feature. · LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display (8). · RESET Press and hold this button for 10 seconds using a ball-point pen or other thin metal object. [. . . ] Notes on CD-Rs (recordable CDs)/ CD-RWs (rewritable CDs): 1. Be sure to use discs with following marks only for the unit to play: Recordable Rewritable 2. The unit cannot play a CD-R and CDRW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more information on finalization process). [. . . ]