User manual BOSTON ACOUSTICS DSI285

[. . . ] Behind the mounting surface, there must be 1-inch (25mm) clearance around the mounting hole. For new construction installations, we offer new construction brackets. The NCB brackets act as a perfect guide when cutting the wallboard. [. . . ] important: Do not overtighten the screws. If you wish to paint your speakers or grilles, it should be done prior to installation of the grille. Insert the grille into the slots in the baffle by gently applying pressure along the edge. The speakers may be painted before or after they are installed. Insert the supplied paint mask into the frame of the speaker. If you are using spray paint, apply two light coats. If you are applying paint with a brush or roller, thin the paint and apply two very light coats. This helps prevent excessive paint buildup or "runs" on the frame. After the paint has dried, use the finger pulls to remove the paint mask. Carefully remove the cloth from the inside of the grille. If you are using spray paint, apply two light coats. If you are applying paint with a brush or roller, thin the paint and apply two very light coats. This helps prevent paint from filling the holes on the grille. After the paint is dry, reinstall the cloth and grille logo. [. . . ] 142-002522 This drawing and data embody proprietary designs and information which is the confidential property of Boston Acoustics, None of which shall be copied, reproduced, disclosed to others, proposed or used in whole or in part, for any purpose without express written permission of a duly authorized agent of Boston Acoustics. This drawing is subject to recall by Boston Acoustics at any time. It is being submitted in confidence and patent rights are reserved by Boston Acoustics. [. . . ]