User manual BOSTON ACOUSTICS NCBR5

[. . . ] NCBR5 NCBR6 NCBR8 NEW CONSTRUCTION BRACKETS for Boston Acoustics Designer Series Ceiling Mount Speakers INSTALLATION INSTRUCTIONS The New Construction Bracket is a mounting frame to simplify the installation of Boston Acoustics Designer speakers. Because the bracket is mounted prior to the wallboard installation, it allows the installer to pick locations free from obstructions. [. . . ] When the flange is pointed towards the room, the wallboard needs to be measured and cut prior to installation. The finished opening should align with the edges of the new construction bracket's flange. Using nails or drywall screws, attach the two wings to the joists or studs so that the wings are 90° to the bracket. There will be some play in the bracket to allow for minor adjustments or leveling. This will lock the bracket into position. Bend "speaker wire tie-down tab" inwards, and secure to speaker wire with a cable tie. Cut off excess wing or bend it into the empty stud bay. opposite wings NCB speaker wire tie-downs 90° excess wing NCB *Behind the wall there must be 1 inch (25. 4mm) clearance around the mounting hole. Cover5 Cover6 Cover8 Cover5R Cover6R Cover8R COVER PLATE for Boston Acoustics Designer Series Ceiling Mount Speakers The Cover Plate is a blank plate that covers a pre-cut hole for the installation of a Boston Acoustics Designer Series ceiling-mount speaker. The Cover Plate may also be used with a Boston Acoustics New Construction Bracket. The Cover Plate can be painted or wall papered to match the wall or ceiling color. A house has been pre-wired and the speakers have not yet been purchased. The user moves and wants to take the speakers with them. [. . . ] Specifications subject to change without notice. Boston and Boston Acoustics are registered trademarks of Boston Acoustics, Inc. [. . . ]