User manual BOSTON RECEPTER

[. . . ] The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. [. . . ] The Radio also has two independent wake-up alarms. Either alarm can be set to music, buzzer, or both. A large, easy-to-read LCD display clearly presents the station, clock, and alarm/sleep status, while a built-in sleep function lets the Radio play for up to 60 minutes before turning off automatically. The Radio is fast and easy to use and set, since times and stations can be rapidly selected by spinning a knob rather than repeatedly pressing buttons. And once you have stored your favorite stations in memory, the tuning knob can be set to tune in only those stations. T store a preset station: o - Use AM>FM> Presets to choose AM or FM tuning. Then use AM>FM>Presets to set knob to tune Presets only store preset dim clear preset set with tuning knob alarm 1 clock alarm 2 store preset dim clear preset Display Alarm 1 On/off Alarm 2 set with tuning knob Alarm 1 clock Alarm 2 Snooze / sleep Readout showing clock time, sleep mode, and low battery indicator Presets Display On/off 20 Alarm 1 96. 9 FM Presets 20 Alarm 2 On/off Alarm 1 10:03 Tuning FM PM Alarm 1 Alarm 2 Sleep Alarm 2 AM>FM>Presets Snooze / sleep Alarm activated, music + buzzer mode Tuning knob Volume knob ON/OFF BUTTONS Turns the Radio on or off. On/off On/off CHOOSING AM/FM BAND AM>FM>Presets 1. Push AM>FM>Presets or "FM Tuning" is displayed. button until "AM Tuning" VOLUME KNOB Turn clockwise to increase volume. 1. MANUALLY TUNING TO A STATION After choosing either AM or FM band, turn the tuning knob until the desired station is tuned. SETTING THE CLOCK 1. 2. Push the clock button (time display will flash). While the time display is flashing, turn the tuning knob to the desired time. Note: PM is indicated on the display; AM has no indication. ENTERING STATIONS INTO PRESET MEMORY 1. 4. DISPLAYING THE WAKE-UP ALARM TIME 1. Manually tune to desired station. Press and hold the store preset button for 1 second until you hear a beep confirmation. The display will show the preset station number in the upper left corner of the display. Note: Stations will store in the order that they were entered into memory, regardless of whether they are FM or AM stations. When an alarm is set, tap the button above the appropriate Alarm 1 or Alarm 2 button to check the respective alarm time setting. The alarm time will flash in the display for 5 seconds, then the display will revert to its normal readout (either current clock time or radio frequency if the Radio power is on, or current clock time if the Radio power is off). TURNING OFF THE ALARM WHEN IT IS SOUNDING On/off LISTENING TO PRESET STATIONS AM>FM>Presets 1. 1. 2. Push button until the word "Presets" is displayed. 2. Turn the tuning knob to the preset you wish to listen to. CLEARING STATIONS FROM PRESET MEMORY 1. 3. Push the AM>FM>Presets button to engage Presets mode. Turn the tuning knob to the preset you wish to clear. Press and hold the clear preset To turn off the alarm, press the On/off button on either the top or front of the Radio. The alarm will remain set to go off at the same time the next day. To disable the alarm completely, press the Alarm 1 (or Alarm 2) button repeatedly until the "Alarm" indicator is no longer visible in the display. On/off USING THE SNOOZE FUNCTION 1. 2. button for 1 second until you hear a beep confirmation. When a station is cleared from memory, the Radio will mute until the tuning knob is turned again. 4. Note: Holding the clear preset button for 10 seconds will clear ALL the preset stations. [. . . ] Clock display, radio operation, and alarm functionality resume when AC power is restored. Change the batteries when the low battery symbol appears in the display. To preserve memory settings, leave the Radio plugged in when changing the batteries. NOTICE FOR CABLE TV SYSTEM INSTALLER Please make note of Article 820-40 of the NEC (of USA) that provides guidelines for proper grounding. After it has been repaired, we will return it freight prepaid in the U. S. [. . . ]