User manual BRAUN 2040

[. . . ] € During ironing pauses, always place the iron upright on its heel rest and ensure that the heel rest is placed on a stable surface. € The iron must not be left unattended while it is connected to the mains supply. € Keep the iron away from children, especially when using the Power shot function. Electric irons combine high temperatures and hot steam that could lead to burns. [. . . ] Notice: While ironing, do not turn the steam regulator beyond . The temperature selector (6) has to be set within the red range (between «••» and «max»). Preconditioning (only with model SI 2040) Steam also develops horizontally at the front area of the sole plate. This preconditions the textiles by «pre-steaming», thus making ironing easier. Be careful – steam comes out laterally. 2 Power shot Prior to use, press the Power shot button (5) 3 to 4 times to activate it. Press the Power shot button in intervals of at least 5 seconds. Power shot can be activated when dry ironing. The temperature selector has to be within the solid red range (between «•••» and «max»). Models SI 2030 and SI 2040 only: The Power shot function can also be used in the vertical position for steaming hanging clothes. To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest. € Ne repassez ou ne défroissez jamais des E Maintenance and cleaning To prevent damaging the sole plate, do not iron over metal buttons or zippers. Clean the sole plate regularly with a damp cloth. To remove mineral/starch residues, use a vinegar/water mixture in the ratio of 1 : 2. Never use steel wool, abrasive scouring pads, powders or other chemicals to clean the sole plate. F Cleaning the anticalc valve The anticalc valve located on the lower end of the steam regulator (3) has to be decalcified regularly (e. For this, the water tank has to be empty. Removing the steam regulator with the anticalc valve: Turn the steam regulator clockwise towards . Keep on turning firmly beyond the resistance until the steam regulator is lifted. When positioned at «•» (anticalc system), pull it out vertically. Do not touch the anticalc valve at its lower end. [. . . ] Hold strygejernet uden for børns rækkevidde, især når du benytter Power shot dampfunktionen. € • Fyld vandtanken op igen, og lad strygejernet varme op, og tryk så på Power shot knappen 4 gange for at rense strygejernet inden strygning (fig. Fejlfindingsvejledning Problem Der kommer vanddråber ud af dampventilerne Løsning Drej dampregulatoren mod uret for at begrænse eller slukke for dampen. Inden for garantiperioden vil Braun for egen regning afhjælpe fabrikations- og materialefejl efter vort skøn gennem reparation eller ombytning af apparatet. [. . . ]