User manual BRAUN 330. 340

[. . . ] The iron must not be left unattended while it is connected to the mains supply. Keep the iron away from children, especially when using the Power shot function. Never iron or dampen clothes while wearing them. [. . . ] The pilot light (7) goes off when the desired temperature is reached (after approx. 1 Vario steam You can select the steam quantity using the steam regulator (3). Notice: While ironing, do not turn the steam regulator beyond . Preconditioning (only with model SI 2040) Steam also develops horizontally at the front area of the sole plate. This preconditions the textiles by «pre-steaming», thus making ironing easier. Be careful ­ steam comes out laterally. 2 Power shot Prior to use, press the Power shot button (5) 3 to 4 times to activate it. Press the Power shot button in intervals of at least 5 seconds. Power shot can be activated when dry ironing. Models SI 2030 and SI 2040 only: The Power shot function can also be used in the vertical position for steaming hanging clothes. To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest. Clean the sole plate regularly with a damp cloth. to remove mineral/starch residues , use a vinegar/water mixture in the ratio of 1 : 2. Never use steel wool, abrasive scouring pads, powders or other chemicals to clean the sole plate. Removing the steam regulator with the anticalc valve: Turn the steam regulator clockwise towards . Keep on turning firmly beyond the resistance until the steam regulator is lifted. when positioned at «· » (anticalc system), pull it out vertically. [. . . ] Take longer intervals when pressing the Power shot button. 2 Fonction Power shot Avant utilisation, appuyez sur le bouton Power shot (5) 3 à 4 fois pour l'activer. Less steam develops or no steam at all Calcium particles coming through the steam vents Subject to change without notice. [. . . ]