User manual BRAUN 720S-3S

[. . . ] Do not exchange or tamper with any part of it, otherwise there is risk of electric shock. This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are supervised by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children. [. . . ] The personalization feature, controlled by intelligent software, is designed to give you a smooth skin even in the most sensitive areas of your face with less irritation. The different settings are indicated by the pilot light incorporated in the on/off switch 5: «Sensitive» = white (for a thorough comfortable shave in sensitive areas of your face such as neck) For a thorough and fast shave we recommend the «intensive» setting. pressing the « + » or « ­ » button activates your preferred setting. When switching on next time, the last used setting will be activated. How to use Press the on/off switch 5 to operate the shaver: · The pivoting shaver head and floating foils automatically adjust to every contour of your face. Under the nose) slide the shaver head «lock» switch 3 to the back position to lock the pivoting head at an angle. Tips for the perfect shave For best shaving results, Braun recommends you to follow 3 simple steps: 1. At all times, hold the shaver at right angles (90°) to your skin. Stretch your skin and shave against the direction of your beard growth. The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean: · Switch the shaver on (cordless) and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. Next, switch off the shaver, press the release button 2 to remove the foil and cutter cassette 1 and let it dry. [. . . ] After you have replaced the foil and cutter cassette, use a ball-pen to push the reset button 8 for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time. [. . . ]