User manual BRAUN DENTA-PRIDE

[. . . ] Braun Oral-B Denta-Pride has a waterproof handle, is electrically safe and is designed for use in the bathroom. To assemble the base station (h) as a charging unit, detach the base plate (g) first (see diagram 1, page 3). place the charging ring into the base station and attach the base plate as shown ( 2 and 3 , page 3). Then insert the protective cover (i) on the back of your base station ( 4, page 3). [. . . ] ⷠBrush the gums as well as the teeth, first the outsides, then the insides, finally the chewing surfaces. ⷠDo not press too hard or scrub, simply let the brush do all the work. To help you get optimum brushing results, Braun Oral-B Denta-Pride has a pressure control feature to ensure that the right degree of pressure is applied. This helps protect your gums from excessive brushing and makes your toothbrush easy to operate. If too much pressure is applied, the oscillating movement of the brush head will continue but the pulsation will stop. In addition to feeling the change, you can also hear a different sound. Brushing modes Braun Oral-B Denta-Pride offers different brushing modes for varying oral care needs: «Clean» «Soft» ­ Exceptional mouth cleaning. «Polish» ­ Exceptional polishing and natural whitening for occasional or everyday use (deluxe model only). How to switch between brushing modes: · Braun Oral-B Denta-Pride automatically starts in the «Clean» mode when pressing the on/off button. If you wish to switch to the «Massage» mode, press the brushing mode button again and let the brush head pulse against your gum line. ⷠThe «Polish» mode (deluxe model only) is best used with a Professional White brush head. Once the Professional White brush head is attached, press the on/off button and your toothbrush automatically starts in the «Polish» mode (please see «Brush heads»). To turn your brush off, press the on/off button. During brushing, the SmartDisplay shows the brushing mode you have selected, followed by your actual brushing time. When you finish brushing, the total brushing time will be displayed for 30 seconds before the display switches back to the battery charge level. To directly get to the battery charge level display, you can clear the brushing time display by pushing the brushing mode button. In the first few days of using Braun Oral-B Denta-Pride, your gums may bleed slightly. In general, bleeding should stop after a few days. Should it persist after 2 weeks, please consult your dentist or hygienist. If you have sensitive teeth and gums, Oral-B recommends using the «Soft» mode. Brush heads & accessories The Braun Oral-B FlossAction and Professional White brush heads contain a «smart chip» to communicate with the electronics inside the Braun Oral-B Denta-Pride handle. The «smart chip» works for you, automatically switching to the appropriate brushing mode for the attached brush head. [. . . ] Nevertheless, in the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Oral-B Repair Centre or at approved recycling or disposing locations in accordance with local regulations. Battery removal at the end of the product's useful life Open the handle as shown, remove the battery and dispose of it according to local environmental regulations. Opening the handle will destroy the appliance and invalidate the guarantee. [. . . ]