User manual BRAUN EP 25

[. . . ] Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun appliance. [. . . ] With the small distance comb you may choose between six settings (approx. It is advisable to begin with the highest setting and then reduce the setting until you reach the desired beard length. ⷠHold the distance comb with the angled edge against your beard and guide the trimmer against the direction of hair growth. ⷠTo avoid clogging the distance comb with hair, clean it from time to time with the brush. Please note that the distance comb can only be taken off, when the trimmer is turned off (position «0»). c Hair cutting · The hair should be clean, well combed, tangle-free and dry. ⷠProceed as described under (B), but using the larger distance comb (settings approx. If you are not used to clipping hair, begin with a higher setting and then reduce the setting to avoid cutting more hair than desired. If you want to cut your hair shorter than 10 mm, we advise to first cut it with the larger distance comb down to 10 mm and then use the smaller distance comb for the desired length. ⷠUse a slow and controlled movement. Do not force the appliance through the hair faster than it can be cut. ⷠIn between, shake or blow off the hair. If too much hair is caught in the distance comb, remove and clean it. Please note that the distance comb can only be taken off, when the trimmer is turned off (position «0»). [. . . ] ⷠThen click the twin cutter system back to its original position by pushing forward. At the end of their life, empty batteries and the appliance should not be thrown away with general waste or rubbish. [. . . ]