User manual BRAUN SATIN HAIR 7

[. . . ] important · Plug your appliance into an alternating current ( ) outlet only and make sure that your household voltage corresponds to the voltage printed on the appliance. This appliance must never be used near water (e. ⷠFor additional protection, it is advisable to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom. [. . . ] Colour Saver Technology with satin ions maintains the precious health of colored hair as it protects your hair from dry out and damage and prevents moisture loss of coloured hair by up to 50% while styling. As satin ions are released onto your hair a slight crackling noise can be heard. For beautiful bouncy curls and waves that look more healthy and radiantly vibrant for longer. Thanks to its sophisticated microprocessor and its LC control display the Braun Satin Hair Colour Styler intuitively guides you to the accurate temperature for fine, normal or thick coloured hair. Personalized settings: Using the hair type selectors [6] you can adjust the temperature for fine, normal and thick hair. For medium and thick hair type, you have the choice between a low and high setting. Connect the appliance to an electrical outlet and push the on/off button [7] for 1 second to turn it on. ⷠDuring heat-up, the display shows three flashing segments (Fig. After approximately 45 seconds, the default temperature for normal hair is reached and you can start using the appliance. ⷠUsing the hair type selectors [6], choose your preferred setting. Make sure your hair is completely dry before using the appliance. ⷠComb your hair with a wide-toothed comb to remove tangles. Starting at the hair tips, clamp a section of hair (strand of 3-4 cm max. Allow the strand to remain curled up for a couple of seconds before unwinding it. [. . . ] After 20 minutes cooling time, you will be able to touch the heating barrel without any risk. ⷠDuring use and cooling down, the appliance always has to be placed on a heat-resistant surface. Clean the appliance with a damp cloth and use a soft cloth to dry. [. . . ]