User manual BRAUN ST 710

[. . . ] ⷠFor additional protection, it is advisable to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom. This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children. [. . . ] ⷠDuring heat-up, the display turns red. 30 seconds, the display turns green indicating that the minimum styling temperature is reached. ⷠAs soon as the preset temperature is reached, the thermometer symbol stops flashing [B]. ⷠIndividual temperature choice: Using the temperature selection buttons (3), you can adjust the temperature in 5 °C steps in a range between 130 °C and 200 °C. And for professional styling results 175 °C ­ 200 °C The higher the temperature setting, the faster you will get a sleek straightening result. When working with the maximum temperature setting, you should not treat the same strand more than once. ⷠ°C max booster: For handling difficult hair strands, you can instantly boost the temperature by pushing the «°C max» button (4). For 20 seconds, the appliance will heat up to the maximum temperature with the backlight flashing [D]. Safety auto off: For safety reasons, the appliance automatically switches off after 30 minutes. Five minutes prior to switching off, the display shows «Auto off» [E] along with a red/green flashing backlight. If you want to keep on straightening, simply press the «on/off» button (6) again shortly. ⷠMemory function: In order to make your styling session as convenient and quick as possible, the appliance stores your last personalised settings for the next usage. Make sure your hair is completely dry before using the appliance. ⷠFirst, comb your hair through with a wide toothed comb to remove tangles [G]. Starting close to the roots, take a thin section of hair (strands of 3­4 cm maximum) and clamp it firmly between the styling plates [H]. How to straighten your hair · Gently run the straightener through the entire length of the hair, slowly and steadily, from roots to the ends [I] without stopping for longer than 2 seconds. This will ensure best straightening results without damaging your hair. Since the NanoGlide Ceramic plates are 3 times smoother than conventional ceramic plates, they protect your hair from damage by providing friction-free gliding. [. . . ] This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. [. . . ]