User manual BREVILLE BCG450XL

[. . . ] ⷠDo not leave the appliance unattended when in use. Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven. ⷠDo not use on metal surfaces, for example, a sink drain board. Do not operate this appliance for longer than 2 minutes at a time as this could cause overheating. [. . . ] It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. With transparent window With suggested coffee style settings Before first use Before first use, remove any promotional stickers or packaging material attached to your coffee grinder. Remove the Bean Container, Bean Container Lid and Ground Coffee Container and wash in warm soapy water with a soft cloth. Before each use, ensure Grinding Chamber and Ground Coffee Container are clean and empty. Remove the Burr Grinder inside the Grinding Chamber by gripping the small inner black plastic frame and pulling out the top ring. Using a soft cloth, wipe off any excess protecting oil from the Burr Grinder and place it back into the Grinding Chamber. Place the Bean Container into the Grinding Chamber so the `ALIGN' arrow on the Bean Container aligns with the `ALIGN' arrow on top left-hand side of the Grinder. Turn the Bean Container clockwise to lock into position. Measure the desired quantity of whole coffee beans or spices directly into the Bean Container and cover with Bean Container lid. Plug the Grinder into a 110v power outlet. To select the desired fineness of grind, rotate the Bean Container and align the white marker on the front panel of the Grinder with one of the following settings: COARSE MEDIUM FINE EXTRA FINE SUPER FINE ­ Percolator ­ French Press ­ Filter ­ Espresso ­ Turkish NOTE: In order to remove any excess protecting oils from the Burr Grinder, it is necessary to grind 1. 75 oz (50g) of coffee beans on the Super Fine (Turkish) setting. The Coffee Grinder will begin grinding the coffee/spices directly into the Ground Coffee Container and will stop automatically when grinding is complete. To stop the grinding cycle at any time, push the `START' button again. If the `START' button is pressed again, the grinder will start from the beginning of the timed cycle. Gently tap the side of the Grinder, above the Ground Coffee Container, so that any grinds remaining in the release chute are released into the Ground Coffee Container. Remove the Bean Container, Bean Container Lid and Ground Coffee Container and wash in warm soapy water with a soft cloth. Wipe the Grinding Chamber with a soft dry cloth and replace the Bean Container, Bean Container Lid and Ground Coffee Container back into position. Rewind the power cord into the cord storage area located under the Grinder base. Grind coffee beans immediately before brewing. To ensure optimal grinding performance, allow Coffee Grinder to cool for at least 2 minutes between uses. ⷠCoffee flavor and strength is a personal preference. [. . . ] Breville ®* warrants this Breville ® appliance against defects that are due to faulty material or workmanship for a period of one (1) year from the date of original consumer purchase. This warranty does not cover damage from abuse, neglect, use for commercial purposes, or any other use not found in the printed "Instructions for use" booklet. There is no warranty for glass parts, glass containers, filter basket, blades and agitators. HWI Breville ® expressly disclaim all responsibility for consequential damages for incidental losses caused by use of this appliance. [. . . ]