User manual BREVILLE BJB840XL

[. . . ] CONTeNTS 4 7 8 10 13 17 20 22 27 28 30 33 37 39 41 43 47 69 Breville recommends safety first Use as a Juice Extractor Know your Breville Juice Extractor Assembling the Juice Extractor Operating the Juice Extractor Disassembling the Juice Extractor Cleaning the Juice Extractor Juice Extractor Troubleshooting Use as a Blender Know your Breville Blender Assembling the Blender Operating the Blender Disassembling the Blender Cleaning the Blender Blending tips Blender Troubleshooting Recipes One year limited warranty We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions: Carefully read all instructions before operating the appliance for the first time and save for future reference. ⷠRemove and safely discard any packaging materials and promotional labels before using the appliance for the first time. [. . . ] For best results the food should be chopped into pieces no larger than 3/4 inch (2cm). Then reconnect the power cord to the wall outlet and recommence normal use. Ensure the Blender is turned off and the power cord is unplugged from the wall outlet. Pull the Safety Locking Arm downwards and over the grooves on either side of the Blender Jug base. NOTe If the Blade Assembly is difficult to remove by hand, insert the provided Blade Removal Tool into the Blade Assembly base and turn counterclockwise. Remove the Blade Assembly (with the Silicon Gasket still in place) from the Blender Jug base by turning counterclockwise. Be careful when handling the blending blades as they are sharp. Always ensure that the power cord is unplugged from the wall outlet before cleaning, disassembling or assembling and storing the appliance. Pull the Safety Locking Arm downwards and over the grooves on either side of the Blender Jug base. Immediately after each use, wash the Lid, Inner Lid, Blender Jug, Removable Silicon Gasket and Removable Blade Assembly (see Disassembling the Blender, page 37) in warm, soapy water with a soft cloth. To remove strong odors, for example, from garlic, fish and some vegetables, soak the disassembled parts for 10 minutes in warm soapy water. Then wash with a mild detergent and a cleaning brush. Immediately fill the Blender Jug halfway with warm (not hot) water and add 1-2 drops of dishwashing liquid. place the Blender Jug on the Motor Base. Select speed 1/MIX and run the Blender for 10-20 seconds. remove the Blender Jug and discard the contents. Rinse the Blender Jug with warm water until clean. Immediately place these parts in the dishwasher on a normal cycle. Remove the Blade Assembly with the Silicon Gasket still in place, from the Blender Jug. Disassemble the Silicon Gasket from the Blade Assembly and place both parts on the top shelf of the dishwasher with the Lid and Inner Lid. The Blender Jug should be turned upside down (with the jug spout facing downwards) to prevent the dishwasher's heating element from damaging the Blender Jug base. Be careful when handling the blending blades as they are sharp. [. . . ] 8oz (250g) packet plain sweet biscuits, broken 4oz (125g) butter, melted 8oz (250g) cream cheese, cubed and softened 1 x can sweetened condensed milk ½ cup (125ml) cream 1 tablespoon grated lemon zest cup lemon juice 1 punnet raspberries, washed 1 cup thickened or pure cream Pulse once or twice if thickening is required. Select speed 2/CHOP and blend until finely crushed. Place cream cheese, condensed milk, cream, lemon zest and juice into blender jug. Select speed 3/BLEND and blend until smooth. [. . . ]