User manual BREVILLE BKE260

[. . . ] Do not use this appliance for other than its intended use. · The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice. IMPORTANT SAFEGUARDS FOR YOUR BREVILLE GLASS KETTLE · Carefully read all instructions before operation and save for future reference. [. . . ] Your kettle will only operate when positioned on the power base with the ON/OFF switch in the ON position. The kettle will automatically switch off once the water has boiled. Ensure that the lid is closed and locked firmly into place. Place the kettle firmly onto the power base. Plug the power cord into the 230/240V power outlet and switch `ON'. Press the ON/OFF switch down to turn ON the kettle. The power `ON' light will illuminate. Always fill the kettle to between the minimum (MIN) and maximum (MAX) marks indicated on the handle on the kettle. Too little water will result in the kettle switching `OFF'. Lift up the ON/OFF to switch it OFF, switch OFF at the power outlet and allow kettle to cool before refilling. Remove the kettle from the power base and add more water. Then, return the kettle to the power base. Filling above the maximum mark on the exterior of the kettle may result in boiling water splashing from the kettle. Safety locking hinged lid Scale filter Operation of your kettle 1. To fill the kettle with water, remove it from the power base and open the lid by pressing the button on top of the lid back towards the handle and lift the lid up. Always fill the kettle between the minimum and maximum marks on the water window. Too little water will result in the kettle switching off. 1. 6 litre capacity Water gauge Note Schott glass Do not remove the kettle from the power base during operation. Ensure the kettle has switched to `OFF' position after the water has boiled, before removing the kettle from the power base. On/Off switch Note 2200 watt concealed element Safety auto cut-out and boil dry protection Multi-directional cordfree base with cord storage Power On indicator DO NOT OPEN THE LID DURING AND AFTER OPERATION. THIS MAY RESULT IN BOILING WATER SPLASHING FROM THE KETTLE. POUR OUT ALL THE HOT WATER FROM THE KETTLE BEFORE OPENING THE LID TO REFILL. 7 6 Operating your Breville Glass Kettle continued 4. The kettle will automatically switch `OFF' once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. [. . . ] Any brown stains appearing are the result of mineral deposits and are not rust. To clean the exterior The outside of the kettle may be wiped over with a damp cloth and polished with a soft dry cloth. Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle. Note The filter could become damaged with time, please check regularly and replace if found damaged. Note Note Note Do not place a load on the top of the glass or knock the glass on a hard surface or drop the kettle. Always take care cleaning or filling the kettle. Note THIS APPLIANCE IS DESIGNED FOR BOILING OF DRINKING QUALITY WATER ONLY. NEVER USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. [. . . ]