User manual BREVILLE BKE420S

[. . . ] · The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice. Read these instructions before operating and save for future reference. · Carefully read all instructions before operation and save for future reference. · Remove any packaging material and promotional stickers before using the kettle for the first time. [. . . ] · It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville centre for examination and/or repair. DO NOT OPERATE THE KETTLE ON AN INCLINED SURFACE. DO NOT MOVE THE KETTLE WHILE IT IS SWITCHED ON. 4 5 Know your Breville Nova Platinum Cordfree Kettle Operating your Breville Nova Platinum Cordfree Kettle Before first use Remove any packaging material or promotional stickers before using your kettle for the first time. It is recommended before the first use to fill the kettle for the maximum level with cold tap water, bring to the boil and then discard the water. Your kettle will only operate when positioned on the power base with the ON/OFF switch in the ON position. The kettle will automatically switch off once the water has boiled. Do not remove the kettle from the power base during operation. Ensure the kettle has switched to `OFF' position after the water has boiled, before removing the kettle from the power base. Lid release button Removable scale filter Note Safety locking hinged lid Operation of your kettle Illuminated power `On/Off' switch 1 Safety auto cut off and boil dry protection To fill the kettle with water, remove it from the power base and open the lid by pressing the lid release button. Always fill the kettle between the maximum and minimum marks on the water window. Too little water will result in the kettle switching off. Dual water windows 1. 7 litre capacity 2. Ensure that the lid is closed and locked firmly into place. Place the kettle firmly onto the power base. Plug the power cord into the 230/240V power outlet and switch `ON'. Press the ON/OFF switch down to the `ON' position. The power `ON' light will illuminate. Always fill the kettle to between the maximum (MAX) and minimum (MIN) marks on the exterior of the water window on the kettle. Too little water will result in the kettle switching `OFF'. Filling above the maximum mark on the exterior of the kettle may result in boiling water splashing from the kettle. Premium quality stainless steel 2400 Watt concealed element Multi-directional cordfree power base with cord storage Note THIS APPLIANCE IS DESIGNED FOR BOILING OF DRINKING QUALITY WATER ONLY. NEVER USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. [. . . ] Return to the power base. The safety device will then automatically reset. Always switch off at the power outlet, and then unplug the appliance from the power outlet before cleaning. To clean the exterior The outside of the kettle may be wiped over with a damp cloth and polished with a soft dry cloth. Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the kettle. Removable filter The kettle features a removable mesh filter to remove scale deposits for cleaner water. To clean the scale deposits remove the filter by opening the lid and sliding the filter up and out of the kettle. The filter can be cleaned by running under hot water and rubbing with a cleaning cloth or brush. [. . . ]