User manual BREVILLE BKE470

[. . . ] · Never immerse the kettle base, switch area, power base or cord in water, or allow moisture to come in contact with these parts. · Keep clear of walls, curtains and other heat or steam sensitive materials. · The appliance is not intended for use by young children or infirm persons without supervision. · Young children should be supervised to ensure that they do not play with the appliance. [. . . ] Your kettle will only operate when positioned on the power base with the ON/OFF switch in the `ON' position. The kettle will automatically switch `OFF' once the water has boiled. This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle, as boiling water will scald. Do not pour the water too quickly. Quiet Boil Technology Breville Quiet Boil Technology Your Breville Moda Kettle includes Quiet Boil Technology, a new development that will make boiling water in the kettle a quieter experience. Please carefully read the following instructions. Maintaining the Quiet Boil Technology Through regular use over time, scale can build up in the kettle that can affect the performance of the Quiet Boil Technology as well as the life of the kettle. Lime and Phosphate are common forms of scale that can damage your kettle. Lime scale, a harmless mineral, comes in the appearance of white, coloured or rusty-looking build up on the inner walls of the kettle. Phosphate scale can't be seen, however it can cause the water to appear cloudy when heated. To prevent scale form damaging your kettle, ensure that the kettle is de-scaled regularly. This is done by emptying the kettle after use and not allowing water to stand in the kettle overnight. Please read Page 8 for information on de-scaling your Breville Moda Kettle. Note 4. The kettle will automatically switch `OFF' once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re-boil it may be necessary to wait for a few seconds to allow the control to reset. The kettle may be stored on its power base when not in use. The power point should be switched off and the appliance plug unplugged from the power when not in use. How it works Quiet Boil Technology consists of a specially designed diffuser ring and unique base coating that minimises the level of noise output during heating. It is only at the point of boil that a light bubbling noise can be heard which will indicate that the water has boiled. Operation of your kettle 1. To fill the kettle, remove it from the power base and open the lid by pressing the lid release button. Do not operate the kettle without water or fill above the maximum mark on the water window. Too little water will result in the kettle switching off before the water has boiled. [. . . ] DO NOT MOVE KETTLE WHEN IT IS SWITCHED ON. 6 DO NOT REMOVE THE DIFFUSER RING. NO 7 Care and cleaning Always switch off at the power outlet and then unplug the appliance from the power outlet before cleaning. Notes Removal of mineral deposits Mineral deposits in tap water may cause the kettle interior and water gauge to discolour over time. This may be removed by using a proprietary kettle descaler, which is available from most leading supermarkets, department stores and hardware stores. Fill the kettle until 2/ 3 full with 1 part vinegar and 2 parts water. Fill the kettle with clean water, bring to the boil and discard water. [. . . ]