User manual BRIO BH 200

[. . . ] Microphone ­ Picks up your voice during a call. Optional Speaker Cover ­ The extra speaker cover is 18 mm in diameter. This larger size cover can be used if the 15 mm cover (installed on headset at factory) feels too loose in your ear. Action / Condition Headset is switched on (power on) Headset is switched off (power off) Status LED Illuminates blue for 1 second Illuminates red for 1 second Briefly flashes blue every 5 seconds Headset Speaker Beeps once Beeps once N/A Charging The Internal Battery Important: Before initial use, charge the BH-200's internal battery for 2 hours. [. . . ] Press the Volume Up and Volume Down Buttons simultaneously for 2 seconds. When the Status LED flashes in a blue / red pattern, release the buttons. Activate the Bluetooth feature on your phone. Set the phone to search for Bluetooth devices. See your phone's user manual for more detailed instructions. Select BRIO BH-200 from the list of displayed devices. Enter pass code 0000 to pair and connect BH-200 to your phone. Note: Some phones pair first, then connect. When connected, BH-200 beeps once and the Status LED double flashes blue every 8 seconds. BH-200 is ready to be used with your phone. Number called is busy N/A Erasing Information For All Paired Phones Switch BH-200 on while your Bluetooth phone is off. BH-200's status should be Connectable (LED flashes blue every 5 seconds). Press and hold the Volume Up Button for 5 seconds. When the headset beeps, release the button. The beep confirms that pairing information for all phones has been erased. Answering / Ending A Call ­ When receiving a call, the ring tone is heard through the headset speaker. To answer a call, briefly press the Power / Call Button on BH-200 or the answer key on your phone. If you do not want to answer the call, press the Power / Call Button two times. To end a call, briefly press the Power / Call Button on BH-200 or the end key on your phone. Adjusting The Headset Speaker Volume ­ Press the Volume Up Button to increase audio level or the Volume Down Button to decrease audio level. Switching A Call Between Headset / Phone ­ During the call, press the Power / Call Button and Volume Down Button simultaneously for 2 seconds, or use the respective function in your phone. Switching Between A Current / Waiting Call ­ To switch from your current call in progress to a waiting call, press and hold the Volume Up Button for about 2 seconds, or use the respective function in your phone. Muting The Microphone ­ To mute or unmute the microphone during a call, press and hold the Power / Call Button and Volume Up Button simultaneously for 2 seconds. A beep is provided every 5 seconds to advise that the microphone has been muted. Troubleshooting If the headset is not functioning, it may be necessary to reset BH-200. [. . . ] If returning directly to HT Mobile Products, follow these instructions: 1. Send to HT Mobile Products ­ Warranty Service Department, 2170 Brandon Trail, Alpharetta, GA 30004. For your protection, we recommend you obtain proof of delivery for your shipment. Include with your product, dated proof of purchase, your name and daytime telephone number, and return address (street address only; return shipments cannot be made to a P. O. [. . . ]