User manual BRITA ON TAP

[. . . ] (Note: Do not open the tap fully as high water pressure from the tap can cause splashing. ) As the funnel fills up the opening will gradually close until it reaches the maximum level. As the opening begins to close you should start reducing the water flow and eventually close the tap when the opening closes. You can watch the water level in the funnel rising through the transparent side of the jug. [. . . ] Illustration 4C Further Instructions for a BRITA Water Filter containing a regular lid If you have purchased a BRITA Water Filter containing a regular lid please read the following instructions regarding step C1. Illustration C1 Fill the funnel with cold tap water and allow the water to filter through. Illustration 5 Discard the first two fillings or use the water for your plants. These first two fillings are used to flush and prepare the filter cartridge. Now re-fill the funnel and the system is ready for use. Illustration 6 There is no need to keep the cartridge immersed in water. Illustration 7 To exchange the cartridge after four weeks, simply use the ring pull handle on the top of the cartridge to remove it from the funnel, and repeat steps 1 to 5 above. Please see illustrations on page 3 To ensure optimum performance you should change your BRITA ON TAP cartridge on a regular basis every four weeks. Your BRITA Water Filter is equipped with the electronic "Memo" or the exchange indicator "Calendar" to indicate when the cartridge must be changed. Illustration 8 The electronic "Memo" measures the recommended time of use of your cartridge and automatically reminds you when to change it. "Memo" needs to be reset every time a new cartridge is inserted. Cartridge life depends on local water quality, for example in an area with hard water (based on carbonate hardness of 12° to 14. To exchange the cartridge, simply pull the ring on the top of the cartridge (please see illustration 7) and follow the instructions for `First use and cartridge exchange'. please remember to reset the electronic "Memo" or to adjust the BRITA "Calendar" (follow instructions on "Memo" or "Calendar"). Please look for the BRITA ON TAP icon on the cartridge packaging to help find your cartridge in store. Wash the parts of your filter system regularly in warm soapy water at least every time you change the filter cartridge. Should your BRITA system not be in use for a prolonged period (e. Vacation), we recommend that you discard any water left inside the system and leave the cartridge inside the funnel. Before using the system again take out the cartridge, clean the system, and repeat steps 2 to 5 of the "First use and cartridge exchange". Please store any replacement cartridge in the original sealed wrapper and in a dry and cool place. care of system · Keep your water filter system out of sunlight and away from heating elements, e. Please consume filtered water within one to two days. [. . . ] Please note that "Memo" should not be removed for any other reason than to dispose of it. The BRITA Household Water Filter System is designed for use only with municipally treated tap water (note: this water is constantly controlled and according to legal regulations safe to drink) or with water from private supplies which has been tested as safe to drink. If an instruction is received from the authorities that mains water must be boiled, the BRITA filtered water must also be boiled. When the instruction to boil water is no longer in force, the entire filter system must be cleaned and a new cartridge inserted. [. . . ]