User manual BRITAX B-MOBILE

[. . . ] We are pleased that our B-MOBILE* will accompany your child safely through the first years of his or her life. A child's safety is your responsibility · Read these instructions carefully and make yourself familiar with the pushchair before using it with your child. If your pushchair is used by someone unfamiliar with it (for example grandparents) always show them how the pushchair works. Your child's safety may be affected if you do not follow these instructions. [. . . ] For children under 6 months the shoulder straps 17 must run through the lower belt slots 15. For children over 6 months the shoulder straps can run through the upper belt slots 15. If using an alternative harness conforming to BS6684, D ring attachments are found on each side of the pushchair. Pull the shoulder straps 17 through How to secure your child using the harness: Push the buckle prongs 16 on either Always re-adjust the harness when changing the seating position of your child. To undo the harness completely you will have to unhook the buckle prongs 16 from the shoulder straps 17. Use the pushchair for children under 6 months only with the backrest 20 reclined all the way back. How to raise the backrest 20: Tilt lever 25 together and push the adjuster 21 upwards until the backrest 20 has reached the desired inclination. Opening the hood window 30 How to remove the pushchair seat when you use the B-MOBILE as a travel system: Unfasten the clips around the rod at You can now pull the cover off. How to fit the pushchair seat: Check that all pushchair seat attachment devices are corretly engaged before us. Use with the infant carrier - travel system Please refer to the user instructions supplied with your child safety seat. The B-MOBILE can be used as a travel system with all Britax/RÖMER infant carriers that are equipped with the "Type A" adapter. The infant carrier adapter is simply clipped from underneath into the edge of the infant carrier or is already integrated into the infant carrier. Carrier attachment devices are correctly engaged before use. Never lift or push the pushchair by the infant carrier. Always apply the brake before fitting the infant carrier onto the pushchair or removing it. Make sure that the travel system Swivel the backrest 20 of the With the infant carrier in a rearwardfacing position, lift it above the pushchair. The infant carrier into the fixation slots 26 on both sides. If your child safety seat is equipped with an integrated travel system adapter, the appropriate description can be found in the user instructions supplied with your child safety seat. Push up the release button 29 on Keep a firm grip on the infant carrier while doing this. You can now remove the infant When using with the BABYSAFE Sleeper, please refer to the user instructions supplied with your carrycot!The B-MOBILE can be supplemented with a suitable raincover 40 and a cosytoes 41. These are available as accessories from your retailer. [. . . ] You can clean the seat cover and the hood with a sponge and lukewarm soapy water. The cosytoes can be cleaned according to the washing label. The plastic parts and the metal parts can be cleaned with a damp cloth. After contact with water the metal parts should be dried off to prevent rust. [. . . ]