User manual BRITAX BABY-SAFE PLUS SHR II

[. . . ] We are pleased that our BABY-SAFE plus II / BABY-SAFE plus SHR II may accompany your child safely through the first months of his or her life. In order to protect your baby correctly, the BABYSAFE plus II / BABY-SAFE plus SHR II must always be used and installed as described in these instructions. Please always keep the user instructions available in the compartment provided on the child seat. If you have any further questions regarding its use, please feel free to contact us. [. . . ] For the protection of all vehicle occupants In the case of an emergency stop or an accident, unsecured persons or objects may cause injury to other vehicle occupants. The child safety seat is always secured when it is in the vehicle, even if no child is being transported. to protect your vehicle · Some vehicle seat covers made from sensitive materials (e. ) may develop wear marks when car seats are used. This can be avoided by placing a blanket or towel under the child seat. The mat must not raise the child safety seat from the seat surface. 1 Securing the baby seat in your vehicle To secure the baby seat using the 3-point belt of your vehicle proceed as follows: The inclination of the baby seat is correct when in front and behind between the rails and the seat surface there is space for about two fingers. In certain cases it is possible that the baby seat does not rest securely or is inclined too steeply on the vehicle seat. This can be remedied by placing a blanket under the child seat or choosing another seat. Ensure that the handle is 5 in its upper position Pull out the vehicle seat belt and place it across Engage the buckle tongue in the vehicle seat Place the lap belt section 10 in the darkblue belt The vehicle seat buckle 9 must not be positioned in the darkblue belt guide 11 or reach so far forward that it lies in front (in the direction of travel) of the darkblue belt guide11. Should this be the case, try it on a different seat. If you have any doubts about installation, please feel free to contact us. Pull the diagonal strap 12 behind the head end of Pull the diagonal belt 12 between the lightblue Holder 13 and the baby seat, until the belt engages. Never use it to carry or fasten the baby seat. When using on the middle seat, it is not necessary to expand the D-SIP ® 24. This protects the D-SIP ® 24 from damage. Push the light blue holder 13 away from the baby Open the vehicle seat buckle 9 and take the lap Belt section 10 out of the dark blue belt guides 11. 3 Checklist to ensure that your baby seat is correctly installed For your baby's safety, check that. The baby seat is fastened against the direction of travel, · The baby seat is only installed on the front passenger seat if no front airbag can strike the baby seat, · The baby seat is only secured using a 3-point belt, · The lap belt section 10 runs through both dark blue belt guides 11 on the baby seat, The diagonal belt section 12 runs through the light blue holder 13 and the baby seat, · The vehicle seat buckle 9 is not positioned in the dark blue belt guide 11, or before the darkblue belt guide11, · The vehicle seat belt is tightened up and not twisted. The sunshade 15 protects your baby's head from intense sunlight (LSF 50). It can be very simply folded up and down on the hood handle 14. An angle of 45° behind the head end. [. . . ] Never use other spare parts or accessories than those supplied or approved by the manufacturer. Never lubricate or oil parts of the child seat. Store the child seat in a safe place when it is not in use. avoid placing heavy objects on top of it. [. . . ]