User manual BRITAX ESPRIT

[. . . ] · Always make certain that the stroller is fully open and locked before use. · Assembly of this stroller must be performed only by an adult. · Do not hang or place items on the stroller handle or frame. They may cause the stroller to become unsafe. [. . . ] 2 Press down each lever with foot, until fully engaged (fig. 3 Verify that brakes are fully engaged by attempting to move stroller forward and backward. To Release Parking Brake 1 Locate brake lever between each set of rear dual wheels. 2 Use top of foot to lift each lever until released (fig. F). Swivel Wheels C 5 Place stroller on side with handle facing upward. 6 Squeeze frame together while attaching frame lock arm to frame lock knob (fig. C). 6 D 7 Use built-in handle for easy transport. G To allow front wheels to swivel, press swivel lever down (fig. G). H To prevent front wheels from swiveling, turn wheels forward, then lift swivel lever up until engaged with notch (fig. H). 7 Operating Instructions Backrest Hood (cont. ) Operating Instructions A To lower backrest, pull backrest adjuster out, to desired position (fig. A). B To raise backrest, hold backrest adjuster cords, while pushing backrest adjuster in, to desired position (fig. B). D E To Open Hood, pull hood forward (fig. D), then engage each hood lock by pressing down (fig. E). Hood 1 2 C 3 F G To Attach Hood 1 press attachment clips onto each side of stroller frame (fig. 2 Loop each elastic (2x) around stroller frame and attach to knob on hood lock (fig. 3 Attach hook and loop fastener strips (3x) at rear of hood to strips on rear of backrest (fig. To Remove Hood 1 Unhook each elastic loop from knob on hood lock. 2 Lift tab on each attachment clip to release from stroller frame. 3 Release hook and loop fastener strips at rear of hood. 8 To Collapse Hood, release each hood lock by pressing up at center (fig. F), then hood backward to collapse (fig. G). 9 Operating Instructions Harness Parking Brake Care and Maintenance · Periodically check that the parking brake works properly and locks both wheels securely. · Clean out any dirt or debris that may prevent the brake from working. Frame · Wipe the frame with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away excess water and soap. Fabric · Do not machine wash or dry the cover. [. . . ] It is not designed to be compatible with child restraints or carriers. The use of unapproved accessories could cause this product to become damaged or dangerous. Their use automatically voids the Britax warranty. Limitations of Damages The warranty and remedies as set forth above are exclusive and in lieu of all others, oral or written, express or implied. [. . . ]