User manual BRITAX FIRST CLASS PLUS

[. . . ] 1 User instructions We are pleased that our FIRST CLASS plus may accompany your child safely through the first years of his or her life. In order to protect your child correctly, the FIRST CLASS plus must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us. 2 Forward facing for children from 9 kg to 18 kg . [. . . ] € The backrests of the vehicle seats are locked, e. That a foldable rear seat bench latch is engaged. € All heavy or sharp-edged objects in the vehicle (e. € All persons in the vehicle have their seat belts fastened. € The child safety seat is always secured when it is in the vehicle, even if no child is being transported. 47 To protect your vehicle • Some vehicle seat covers of sensitive materials (e. ) may develop wear marks when child safety seats are used. 1 Installing the child safety seat This way of installation should always be preferred to alternative belt guide (see 5. € The child safety seat is securely fastened in the vehicle forward facing, • The child safety seat is secured using a 3-point belt, • The vehicle seat belt is tightened up and not twisted, • The angled foot 37 is not folded out, • The lap belt section12 runs through the two light red 14 belt guides 13 marked with the letter A, 5. 3 Installing the child safety seat (alternative belt guide) This way of installation should only be chosen if the installation by default (see 5. 1) is not possible due to the length of the buckle socket stalk. If in doubt which way of installation is correct for your car, please feel free to contact us. To secure your child seat alternatively forward facing using the 3-point belt of your vehicle proceed as follows: Place the child seat forward facing on the vehicle seat. Place the child seat in the reclined position (see 6. Guide the vehicle seat belt between the seat shell 5 and the seat base 6 up to the belt cover 10 and then onwards through the belt guide 43 to the vehicle seat buckle. A light red arrow 14 marked with the letter B points towards the belt guide 43. Ensure the buckle tongues engage in the vehicle seat buckle 11. 59 Place the lap belt section 12 on the side opposite the vehicle seat buckle into the belt guide 13 on the seat base. A light red arrow 14 marked with the letter A points towards the belt guide 13. Tighten the lap belt section 12 by pulling the diagonal belt section 15. The vehicle seat buckle 11 must not be positioned on or outside the belt guide B (43). 1 if the vehicle seat buckle 11 is on or outside the belt guide B (43). [. . . ] Pull the strap until the metal part 28 is seated squarely in the recess of the seat shell 5. Repeat the last two steps with the second belt. Remarques relatives à l'élimination Please observe the disposal regulations in your country. Next child safety seat Britax / RÖMER child safety seats Tested and certified according to ECE R 44/04 Group Body weight 15 - 36 kg 15 - 36 kg 15 - 36 kg 15 - 36 kg 10. [. . . ]