User manual BRITAX HI LO HIGH CHAIR

[. . . ] · Do not use stroller with a child taller than 44 inches (111. 8 cm). · Do not overload basket ­ Maximum weight in basket is 10 lbs (4. 5 kg). Overloading the basket may cause the stroller to become unstable. [. . . ] · Do not overload the seat-back storage pockets - Maximum weight in storage pockets is 1 lb (0. 45 kg). · Do not overload the cup holder - Maximum weight in cup holder is 1 lb (0. 45 kg). · Do not place hot liquids in the cup holder. · Always make certain that the stroller is fully open and locked before use. · Assembly of this stroller must be performed only by an adult. · Do not hang or place items on the stroller handle or frame except for those approved by Britax. They may cause the stroller to become unstable. · Only use Britax approved child restraints or car seats with this stroller. 2 Section Title · Do not allow children to climb on or play with the stroller. · Never use stroller on stairs or escalators. To reconnect buckle tongues, line up the two pieces and slide the upper portion onto the track on the lower piece 15 Infant Car seat Mode Attaching Britax Infant Car seat Adapters · Slide each of the adapters under the infant car seat handle and into the shell until they click into place There is a left and right adapter and orientation should be as shown · Pull downward on the adapter to ensure that it is secure Removing Britax Infant Car seat Adapters · Pull the release lever and slide the adapters down and out of the infant car seat shell 16 Infant Car seat Mode Attaching a Britax Infant Car seat · Align the adapters and insert into both chassis sockets · Push down until a click is heard · Pull up on the seat to ensure that it is secure 17 Infant Car seat Mode Removing a Britax Infant Car seat · Lift both release levers on each seat locking latch at the same time NOTE: When removing infant car seat from stroller, take care that the car seat does not tip and fall · Lift upward NOTE: Once the infant car seat adapters are installed, they do not need to be removed. The infant car seat will fit into the vehicle base while they are attached WARNING · The infant car seat adapters are ONLY compatible with Britax infant car seat and ONLY models from 2009 or newer · Attempting to fit them into another infant car seat can damage the car seat or cause the car seat to fall · Use the universal adapter (sold separately) for infant car seats other than Britax infant car seats 18 Accessories Rain Cover · Extend the canopy and lay the rain cover over the canopy until the recline lever lines up with the slot on the back of the rain cover · Slide the elastic strap under the foot rest to the bottom of the seat · Pull the bottom of the rain cover over the footrest 19 Other Available Accessories Second Seat Bassinet Turns the HI LO HIGH CHAIR Stroller into a two seater and can be used with Infant Car seat Mode Turns the HI LO HIGH CHAIR Stroller into a bassinet style stroller and can be used with the second seat Child Cup Holders UV/Mosquito Cover Easy storage for drinks and snacks 20 Protects your child from sun and insects while enjoying the outdoors Other Available Accessories Universal Infant Car seat Adapter Lower Infant Car seat Adapter Makes the stroller compatible with major manufacturer's infant car seats Allows an infant car seat to be attached closer to the parent and works with either a seat or an infant car seat in the upper position - Great for twins Travel Bag Boot Cover Extra protection from the cold for your child 21 HI LO HIGH CHAIRTM Stroller Configurations · Shown with optional accessories (sold separately) 22 HI LO HIGH CHAIRTM Stroller Configurations * * Extension adapters MUST be used in this configuration 23 HI LO HIGH CHAIRTM Stroller Configurations · Shown with optional accessories (sold separately) * * * Extension adapters MUST be used in this configuration 24 Care and Maintenance Parking. Brake. · Periodically check that the parking brake works properly and locks both wheels securely . · Clean out any dirt or debris that may prevent the brake from working . · Wipe the frame with a damp cloth and mild soap . Use clean, dry cloth or towel to wipe away excess water and soap . Frame. Fabric. and. Harness · DO NOT machine wash or dry the cover . · Hand wash with cold water and mild soap . Air dry to prevent the cover from shrinking . Cleaning Plastic Parts: · Wipe with a damp cloth and mild soap . Use clean, dry cloth or towel to wipe away excess water and soap . [. . . ] Use clean, dry cloth or towel to wipe away excess water and soap . · DO NOT use abrasives, solvents, strong detergents, or household cleaners . · DO NOT iron . Maintenance · If stroller gets wet wipe with a clean cloth or towel to prevent corrosion . [. . . ]