User manual BRITAX KID

[. . . ] It is in no way suitable as a seat or toy in the home. Should your child be secured in the vehicle seat with only a 2-point belt, he or she could sustain serious injuries possibly resulting in death. Never use in connection with a 2-point belt!This is how you can use your child safety seat: Forward facing rearward facing with 2-point belt with 3-point belt 2) on front passenger seat on outer rear seat on centre rear seat (with 3point belt) (Please observe the relevant regulations in your country. [. . . ] Have your child sit down in the child seat and check the height. Repeat this process until the headrest 3 is at the optimal height. Please observe: The best possible protection can only be ensured if the vehicle seat is in its upright position. The backrest 2 of the child seat can be inclined backwards into a reclining position independent of the the vehicle seat. To do so, fold out the displacement angle 9 on the back of the backrest 2. Now incline the backrest 2 backwards until the displacement angle 9 lies flat along the back of the vehicle seat. Do not incline the backrest 2 farther than specified by the displacement angle 9. Your child is simply secured with the vehicle seat belt. Fastening the vehicle seat belt Place the child seat on the vehicle seat. Please be sure that the backrest 2 lies flat along the back of the vehicle seat (see 3. If the headrest of the vehicle seat is bothersome, simply turn it around. Pull out the vehicle seat belt and guide it in front of your child to the vehicle seat buckle 10. Engage the buckle tongue in the vehicle seat buckle 10. Inserting the vehicle seat belt into the red belt guides of the child seat. Insert the diagonal belt section 6 and the lap belt section 11 on the side of vehicle belt buckle 10 under the armrest into the light red belt guide 12 of the seat cushion 1. The vehicle seat beat 10 may not rest between the light red belt guide 12 and the armrest . Insert the lap belt section 11 on the other side of the seat cushion 1 into the light red belt guide 12 as well. The lap belt section 11 must lie as low as possible over your child's hips. Insérez la sangle diagonale 6 dans le support de sangle rouge foncé 7 de l'appui-tête 3 jusqu'à ce qu'elle repose complètement et sans être torsadée dans le support de sangle 7. Guide the diagonal seat belt section 6 into the dark red belt holder 7 of the headrest 3 until it lies completely in the belt holder and is not twisted 7. The diagonal belt section 6 can now be easily inserted. Now return the headrest 3 to the proper height. [. . . ] This is not a material defect, but rather a normal sign of wear which is not covered by the warranty. Buckle: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. He or she will give you the advice and support you need. when processing claims , product-specific depreciation rates will be applied. [. . . ]