User manual BRITAX KIDFIX SICT

[. . . ] 14 User instructions We are pleased that our KIDFIX SICT may accompany your child safely through a new stage of his or her life. In order to protect your child correctly, the KIDFIX SICT must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us. 1 with the KIDFIX locking arms into the ISOFIX fastening points in the vehicle (semi-universal). [. . . ] The KIDFIX SICT can be installed in the vehicle in two different ways. € the backrests of the vehicle seats are locked (i. That a foldable rear seat bench latch is engaged). € all heavy or sharp-edged objects in the vehicle (e. € all persons in the vehicle have their seat belts fastened. € the child safety seat is always secured when it is in the vehicle, even if no child is being transported. € Air Cushion 27 does not rest against the vehicle door or the interior wall of the vehicle To protect your vehicle • Some vehicle seat covers of sensitive materials (e. ) may develop wear marks when child seats are used. This can be avoided by placing a blanket or towel under the child seat. 1 Fastening with the KIDFIX locking arms The KIDFIX SICT is installed permanently in the vehicle with the KIDFIX locking arms. Your child is then buckled into the child seat with the vehicle's 3-point seatbelt. σ Clip the two insert guides 16*, recess facing upwards, to the two ISOFIX fastening points 20. The ISOFIX fastening points 20 are located between the surface and the backrest of the vehicle seat. * The insert guides make it easier to install the seat using ISOFIX and prevent the seat cover from becoming damaged. When not in use, they should be removed and kept in a safe place. If your vehicle has folding backrests, remove the insert guides before folding them down. Most malfunctions are caused by contamination in the insert guides and on the hooks. σ Grasp the seat surface though the access slot in the cover. σ Push the KIDFIX locking arms 15 out all the way. σ Pivot the KIDFIX locking arms 15 180° to the rear. σ Push the green safety button 22 and the red release button 23 on both KIDFIX locking arms 15 towards each other. This ensures that both hooks on the KIDFIX locking arms 15 are open and ready to use. [. . . ] In this case, only use the child seat on the rear seat. 2 Checklist to ensure that your child is buckled up correctly For the safety of your child, please check that. € the vehicle seatbelt buckle 10 is not positioned between the light red belt guide 12 and the armrest of the seat cushion, • ensure that the child seat is not located by the vehicle door or the interior wall of the vehicle. The Britax/RÖMER accessories programme includes a drink holder 24, which can be fitted on the child seat subsequently. [. . . ]