User manual BRITAX SERENITY

[. . . ] The Britax trademark is the property of Britax Excelsior Limited - UK. Visit the Britax website at: http:/www. britax. com. au or email us at custserv@britax. com. au Due to the variations in the style and design of our products the illustrations used in this instruction booklet are generic. 12/09 c 2009 Copyright Britax Childcare Pty. Australia. KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE 12 Art No. 4001100 Model 2406A CARE AND MAINTENANCE READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE. [. . . ] · Do not use this rocker once your child can sit unaided. · This rocker is not intended for prolonged periods of sleeping. · This rocker does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed. · Do not allow children to use the rocker as a toy or interfere with the rocker when in use. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE. WARNINGS 02 www. britax. com. au www. britax. com. au 11 11. TO FOLD THE ROCKER NOTE: REMOVE THE CHILD FROM THE ROCKER BEFORE FOLDING THE ROCKER. A Before folding, remove the toy bar and rotate the rear static/rocking bar inside. To fold the rocker, holding the rocker at the front with your left hand, slide the button (1) across to the right and hold, then lift lever (2) up with your fingers and push the backrest forward until fully folded. PARTS LIST A B C D E F G - Metal frame - Fabric seat cover - Canopy - Toy bar with 3 toys - Head pillow - Shoulder harness pads - Vibration & Sound unit A A-1 A-2 B C D 12 12. REMOVE THE FABRIC SEAT COVER A The fabric seat cover is easily removable for washing. To remove, unfasten the two safety clips from the underside of the rocker. Gently pull the seat cover from the metal frame. Remove the cover from the footrest first, then slide off the seat cover from the backrest. Place the cover back on by reversing the above process. E F G NOTE: THE STRAPS ON THE BACK OF THE ROCKER CAN BE ADJUSTED AS REQUIRED. 10 www. britax. com. au www. britax. com. au 03 1. ATTACHING & USING THE VIBRATION & SOUND UNIT NOTE: ATTACH THE VIBRATION & SOUND UNIT BEFORE UNFOLDING OR OPENING THE FRAME. The seat cover is not fully attached for this purpose. You required 1 size C and 3 size AA batteries. A To insert the batteries, unscrew the battery lid from underside of the unit using appropriate screwdriver. Place batteries into the correct position observing the correct polarity and re-fit the battery lid. NOTE: GREY BUTTON 1 IS A SAFETY LOCK AND LEVER 2 IS THE BACKREST ADJUSTER. A Rotate the rear bar into the static position. To assist with backrest adjustment place one hand on the tube area. [. . . ] TO SECURE YOUR CHILD WARNING: Use this harness at all times. A A five point harness is provided to restrain your child. To secure the child in the harness, push buckle prongs (A) and (B) into buckle housing (C) until the buckle prongs snap into position. carefully adjust the harness by pulling the slider (D) until the desired fit is achieved in the lap, shoulder and crotch straps. To release the buckle, squeeze the top and bottom prongs. . [. . . ]