User manual BRITAX VIGOUR 3 PLUS

[. . . ] DO NOT dry clean or use bleach or any other aggressive cleaning agents. To maintain the safety of your stroller, seek prompt repairs for bent, torn or broken parts. Use only those parts and accessories approved by Britax. Replacement parts and accessories are available from your Britax stockist or contact Britax Customer Service Read these instructions carefully before use and keep them for further reference. [. . . ] If it does get wet, allow to dry unfolded at room temperature. DO NOT place more that 4kg in the basket, or 1kg in the canopy pocket (if supplied). DO NOT allow children to play with or adjust the stroller. DO NOT carry more than one child on this stroller. DO NOT lift the stroller by the bumper bar ­ it may disengage. DO NOT use accessories that are not approved by Britax Excelsior Limited. DO NOT use a PVC rain cover indoors, in a hot atmosphere or near a direct heat source - your child might overheat. DO support the back of the stroller seat when reclining it. DO if using an alternative harness, please ensure it conforms to an appropriate safety standard i. e. `D' ring attachments are found on each side of the stroller. DO read the cleaning instructions for the cover. DO ensure children are clear of moving parts and locking devices while making adjustments. DO periodically check that any screws, nuts, bolts and other fastenings are fully tightened. DO store the stroller in a safe place when not in use. Avoid placing heavy objects on top of it and do not store near direct heat sources, e. g. radiators, open bar fires or in direct sun light as the cover may fade. ALWAYS remove the child from the stroller before going up or down stairs or escalators. This stroller is designed and manufactured to comply to EN1888: 2005. Carry Cot+ (V Type) also available. Britax Excelsior Limited 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom A Britax Childcare company Customer Service Helpline: 01264 386034 Email: helpline@uk. britaxeurope. com Switchboard: +44 (0) 1264 333343 Fax: +44 (0) 1264 334146 www. britax. eu Introducing your new stroller Handle Hood Release latch `D' ring attachment for use with alternative harnesses conforming to BS 6684. Storage latch Shopping basket Shoulder straps Bumper bar Buckle (under comfort pad) Seat unit (V Type) Adjustable calf support Swivel wheel lock Front swivel wheel UK User Guide Adjustable handle buttons Hood hinge Seat locking latch Chassis Socket Brake lever Locking button Rear wheels AZ0-041 Backrest adjuster lever Pocket Storage pockets Rain cover in bag 5/6/07 10:31:27 1408. 001 - Vigour 3 (UK). indd 1 1 Assembling your chassis 1a 1b 1c 1d Release the storage latch (dia 1a). Hold the handle and lift upwards until the chassis is fully extended and clicks into position (dia 1b). Push the rear wheel assembly into the rear wheel axle (dia 1c). Check the wheel is correctly fitted by trying to pull it out. Repeat this process for both wheels. Adjust the handle to a comfortable height by simultaneously pressing the buttons on the inside of the handle ­ on both sides (dia 1d). Check the chassis is ready for use by pressing down on the handle ­ the chassis should not collapse. [. . . ] Carefully adjust the harness by pulling the slider D until the desired fit is achieved in the waist belt, shoulder and crotch straps. Always adjust the harness when changing the seating position of the child. To release the buckle, squeeze the top and bottom prongs A . WARNING ­ Always use the crotch strap in combination with the waist belt. [. . . ]