User manual BROTHER FAX-750

[. . . ] , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , OWNER'S MANUAL FAX 750 FAX 770 ® If You Need to Call Customer Service Please complete the following information for future reference: Model: FAX750 FAX770 (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: *The serial number is on the back of the unit. Retain this Quick-Start Manual with your sales receipt as a permanent record of your purchase, in the event of a theft, fire or warranty service. Year 2000 Compliant Brother is addressing the Year 2000 related issues for all Brother fax machines and multi-function centers. Our focus is to ensure that our bundled third party software will continue to properly process date/time data after January 1, 2000. Brother fax machines and multi-function centers will function properly after January 1, 2000, provided that all non-Brother hardware, software and firmware used by our customers in connection or combination with Brother fax machines, and bundled software, accurately exchange date data with the Brother products. [. . . ] s Adjust the paper guides to fit the width of your document. Paper Guides See Resolution p. 34 The automatic document feeder (ADF) can hold up to 10 pages, feeding each one individually through the fax machine. Use standard (17 lb­24 lb) paper when using the ADF; if you're using heavier paper, feed each sheet individually to prevent paper jams. s Press Resolution (before you send the fax) to select the resolution for the document you're sending. s DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. s Make sure documents written with ink are completely dry. SETUP SEND 33 Manual Transmission Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax. 1 Insert the document face down in the feeder. 2 Pick up the handset and listen for a dial tone --OR--press Hook and listen for a dial tone. 3 Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index). 4 When you hear the fax tone, press Start . 5 If you're using the handset, hang up. See One-Touch Dialing p. 43 Automatic Transmission This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook . 1 Insert the document face down in the feeder. 2 Enter the fax number from One Touch, Speed Dial, Tel-index or the dial pad. 44 Manual and Automatic Fax Redial If you're sending a fax manually and the line is busy, press retry the number. Redial/Pause to If you're sending a fax automatically and the line is busy, the fax machine will redial automatically up to three times at 5 minute intervals. 34 CHAPTER SIX Basic Sending Operations Contrast If your document is very light or very dark, you might want to set the contrast accordingly. Use S. LIGHT to send a very light document. Use S. DARK to send a very dark document. 1 Insert the document, face down, in the feeder. 3 Use or to select AUTO, S. LIGHT or S. DARK and press Set . 4 Press if you are finished choosing settings, and go to Step 5--OR-- Press 1 if you want to select additional settings. The display returns to the Setup Send menu. [. . . ] Your fax machine calls the remote fax machine. The remote fax machine prints the Memory Status List. EXIT REMOTE OPERATION CHANGE ANSWER MODE Press 9 7 1 Press 9 0 R-5 Retrieving Fax Messages 1 Dial your fax number. 2 When you hear the beep, immediately enter your Remote Access Code ( dial pad to press 9 6 1 2 5 9 ). 3 As soon as you hear two short beeps, use the . 4 Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want your fax messages forwarded, and then press . Press 9 5 . then to Turn feature off, press 1 Select Fax Forwarding, press 2 Select Paging, press 3 2 CHANGE PAGING/FAX FORWARDING SETTING Remote Commands Changing Remote Retrieval Access Code 3 Press 4 Press Stop Set . 1 For the FAX, press Function , 8 , 3 . [. . . ]