User manual BROTHER HL-1660E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BROTHER HL-1660E. We hope that this BROTHER HL-1660E user guide will be useful to you.

Lastmanuals help download the user guide BROTHER HL-1660E.


Mode d'emploi BROTHER HL-1660E
Download
Manual abstract: user guide BROTHER HL-1660E

Detailed instructions for use are in the User's Guide.

[. . . ] Brother Laser Printer HL-1660e USER'S GUIDE Trademarks Brother is a registered trademark of Brother Industries, Ltd. Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple Computer, Inc. Centronics is a trademark of Genicom Corporation. EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson Corporation. [. . . ] Setting the Font and Character Set in the, EPSON FX-850, or IBM Proprinter XL Mode When the EPSON FX-850 or IBM Proprinter XL mode has been selected, the font and character set can be selected. The display shows the following setting menus. SELECT FONT Select the font. Exit CHARACTER SET TABLE PRINT exit To select the font and character set in the EPSON FX-850 or IBM Proprinter XL mode, follow these steps: 1. Press the SEL switch to set the printer off-line. The display shows the font setting menu. You can skip the font setting menu and advance to the character set setting menu with the v or w switch. For this session, go to the next step. SELECT FONT 4­54 CHAPTER 4 CONTROL PANEL 3. When you enter the "SELECT FONT" menu, you can select the internal font, optional slot font, or permanent download font. The display shows the following message. INTERNAL FONT * Press the v or w switch until the desired font source appears on the display. Display Message Font Source Internal font of the printer Optional card font in the upper slot A Optional cartridge font in the lower slot B Permanent download font defined in the HP emulation mode INTERNAL FONT SLOTFONT A SLOTFONT B PERMANENT FONT Since these steps instruct you to select the standard font, select the "INTERNAL FONT" message. Notes When you select the optional fonts or permanent download fonts, note the following: · If the optional font cartridge/card is not installed, the optional font cannot be selected. · If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, the permanent fonts cannot be selected. · When you select the optional font or download font, press the SET switch to enter the sub-menu. After you select your desired one with the v or w switch, press the SET switch again. The list you can print out with the TEST switch helps you to select the optional fonts or permanent download fonts. See "TEST switch" in this chapter or "Selecting the Optional Fonts" in Chapter 5. 4. When you enter the font setting mode, the display first shows the current font with an asterisk. 4­55 USER'S GUIDE BROUGHAM * 5. Press the v or w switch until the desired font appears on the display. See "List of Fonts" on page 4-59. Press the SET switch to make the displayed selection effective. The steps you follow vary according to the font type, scalable or bitmapped. s If you select a resident bitmapped font (Letter Gothic 16. 66) or optional bitmapped fonts, the display shows the character set setting menu. CHARACTER SET Go to step 7. s If you select the resident scalable fonts or optional scalable fonts, the display shows the font style setting menu. BROUGHAM The display changes to the font style menu. BROUGHAM Reg * Press the v or w switch until the desired style appears on the display. Display Message Font Style Light Regular, Roman, Book, or Antique Bold or Demi Extrabold Italic or Oblique . . . . . . . . It 4­56 CHAPTER 4 CONTROL PANEL Note The style indication appears after the font name and the style name differs according to the font name. [. . . ] "?" can be used in place of the check digit. Appendix­57 APPENDICES · When EAN 8, EAN 13, or UPC A is selected with the parameter "t5" or "T5": Ten numerical characters "0" to "9" can be accepted as bar code data. The number of characters for bar codes is limited as follows. EAN 8: EAN 13: UPC A: Total 8 digits (7 digits + 1 check digit) Total 13 digits (12 digits + 1 check digit) Total 12 digits (11 digits + 1 check digit) A number of characters other than above causes data error and the bar code data is printed as normal print data. If the check digit is incorrect, the printer calculates the correct check digit automatically so that the correct bar code data will be printed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BROTHER HL-1660E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BROTHER HL-1660E will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag