User manual BROTHER HL-L9300CDWTT

[. . . ] User’s Guide Brother Laser Printer HL-L9200CDW HL-L9200CDWT HL-L9300CDW HL-L9300CDWT HL-L9300CDWTT For visually-impaired users You can read this manual with Screen Reader ‘text-to-speech’ software. You must set up the hardware and install the driver before you can use the machine. Please use the Quick Setup Guide to set up the machine. Please read this User's Guide thoroughly before you use the machine. [. . . ] If you forget it, you must reset the passwords stored in the machine. call your administrator or Brother Customer Service. While Setting Lock is On, you cannot access the machine settings. Enter a four-digit password using the keyboard on the machine's Touchscreen. Re-enter the password when the Touchscreen displays Verify:. 3 Changing your Setting Lock password Turn Setting Lock off before you change the password (see Turning Setting Lock on/off on page 111). Enter the old four-digit password using the keyboard on the machine's Touchscreen. Enter a four-digit number for the new password using the keyboard on the machine's Touchscreen. Re-enter the new password when the Touchscreen displays Verify:. 110 General Information Turning Setting Lock on/off If you enter the wrong password when following the instructions below, the Touchscreen displays Wrong Password. Enter the registered four-digit password using the keyboard on the machine's Touchscreen, and then press OK. Turning Setting Lock off a b Press on the Touchscreen. Enter the registered four-digit administrator password using the keyboard on the machine's Touchscreen. 0 Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some or all of the operations listed here. You can configure and change the following Secure Function Lock 3. NOTE • Make a careful note of your password. If you forget it, you must reset the password stored in the machine. For information about how to reset the password contact Brother Customer Service. €¢ Only administrators can set limitations and make changes for each user. 111 General Information Active Directory Authentication Active Directory Authentication restricts the use of the Brother machine. if Active Directory Authentication is enabled , the machine's Touchscreen will be locked. You cannot change the machine's settings until the user enters the user ID, domain name and password. [. . . ] ) • When a used toner cartridge is replaced with a new one. €¢ When the printer senses that the ambient temperature and humidity have changed. • When a specified number of printed pages is reached. ρ® Color Registration (Correction of Color Position) In this device, the drum unit and developer unit are prepared for black (K), yellow (Y), magenta (M), and cyan (C), respectively. [. . . ]