User manual BROTHER NETWORK PRINT SERVER

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BROTHER NETWORK PRINT SERVER. We hope that this BROTHER NETWORK PRINT SERVER user guide will be useful to you.

Lastmanuals help download the user guide BROTHER NETWORK PRINT SERVER.


Mode d'emploi BROTHER NETWORK PRINT SERVER
Download
Manual abstract: user guide BROTHER NETWORK PRINT SERVER

Detailed instructions for use are in the User's Guide.

[. . . ] Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless (IEEE 802. 11b/g) Ethernet Multi-function Print Server NETWORK USER'S GUIDE Please read this manual thoroughly before using this machine on your network. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center (http://solutions. brother. com) is your one stop resource for all your printing needs. Download the latest drivers and utilities for your machine, read FAQs and troubleshooting tips or learn about special printing solutions. Version 0 ENG Definitions of warnings, cautions, and notes We use the following icon throughout this User's Guide: Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features. Trademarks Brother and the Brother logo are registered trademarks and BRAdmin Professional is a trademark of Brother Industries, Ltd. [. . . ] In this chapter, you will learn how to configure the network settings using the control panel, located on the front of the machine. The LAN menu selections of the control panel allow you to set up the Brother machine for your network configuration. Press Menu, then press a or b to select LAN. Proceed to the menu selection you wish to configure. See Function table and default factory settings on page 122. Please note that the machine is supplied with the BRAdmin Light Windows® software and Remote Setup applications for Windows® and Macintosh®, which also can be used to configure many aspects of the network. See Using the Remote Setup to change the print server settings (Not available for DCP models) on page 16 a for wired connection or Changing the print server settings on page 26 for a wireless connection. 6 6 Wired LAN TCP/IP / WLAN TCP/IP If you connect the machine with the Ethernet cable to your network, use the Wired LAN menu selections. If you connect the machine to a wireless Ethernet network, use the WLAN menu selections. This menu has nine sections: BOOT Method, IP Address, Subnet Mask, Gateway, Node Name, WINS Config, WINS Server, DNS Server and APIPA. 6 BOOT Method This selection controls how the machine obtains an IP address. Note If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT Method to Static so that the print server has a static IP address. This will prevent the print server from trying to obtain an IP address from any of these systems. To change the BOOT Method, use the machine's control panel, BRAdmin Light utility or Remote Setup. 6 a b c d Press Menu. (For Wired) Press a or b to select Wired LAN. (For Wireless) Press a or b to select WLAN. Press OK. 82 Control panel setup e f g Press a or b to select BOOT Method. Press d or c to select Auto, Static, RARP, BOOTP or DHCP. Press Stop/Exit. 6 Auto mode In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will be used. If no DHCP server is available, then the machine will scan for a BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not answer, the IP Address is scanned through APIPA facility, see Using APIPA to configure the IP address on page 114. After it is initially powered ON, it may take a few minutes for the machine to scan the network for a server. [. . . ] 106 SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 SSID (Service Set Identifier) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 85 C G Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BROTHER NETWORK PRINT SERVER

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BROTHER NETWORK PRINT SERVER will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag